News for hackers. Stuff that matters.
Re:It's DE9, Not DB9 by dcrazy on Friday July 25, 2025 @12:42PM (#44685172)
Which “Molex connector” are you referring to? The ATX spec specifically specifies Molex Mini-Fit part numbers, and claims this is for compatibility with PCIe: https://cdn.instructables.com/ORIG/FS8/5ILB/GU59Z1AT/FS85ILB...

Is Mate-n-Lok perhaps a compatible product from a competitor?

Re:It's DE9, Not DB9 by numpad0 on Friday July 25, 2025 @01:09PM (#44685526)
"Molex" usually refers to flat 4 pin AMP 1-480424-0 or Molex 8981-04P connectors(part number taken from random pdf on the Internet[1]). Confusing as it is... Actual Molex Mini-Fit are rarely colloquially referred to as Molex.

1: https://community.intel.com/cipcp26785/attachments/cipcp2678...

Re:It's DE9, Not DB9 by dcrazy on Friday July 25, 2025 @02:04PM (#44686230)
Ah, so it does appear that Mate-n-Lok is a name that AMP/TE uses for some Molex-compatible products. For example, TE’s Micro Mate-n-Lok appears to be compatible with Molex’s Micro-Fit.
Re:It's DE9, Not DB9 by ssl-3 on Friday July 25, 2025 @01:49PM (#44686031)
I've heard it argued that "Molex" means any extruded-pin connector.

Like "Kleenex" means any facial tissue that is meant to be sneezed on.

(Both uses are wrong, but both also tend to promote efficient communication.)

Re:It's DE9, Not DB9 by SAI_Peregrinus on Friday July 25, 2025 @02:11PM (#44686320)
And "JST" is used for any small white plastic connector with one side open showing the pins. "DuPont" means "Amphenol Mini-PV" or "Harwin M-20" or any other Mini-PV clone.
Re:It's DE9, Not DB9 by 0_____0 on Friday July 25, 2025 @06:17PM (#44689165)
I work a lot with connectors and I'm not really sure what you mean by extruded pin connectors. Typically the terminals are formed from sheet, unless you're using fancy 38999-style pins, which I believe are machined (and very expensive).
Re:It's DE9, Not DB9 by ssl-3 on Thursday July 31, 2025 @04:49PM (#44749955)
I'm not sure what they meant, either. It's just a thing I've heard, verbatim.

I think "extruded" in this context comes from CAD terms, wherein: One builds the 2D cross-section of whatever complexity is entailed, and then mashes the "Extrude" button to add a third dimension to the shape.

I don't think the term, as-used, has anything at all to do with extrusion as a manufacturing process.

Re:It's DE9, Not DB9 by msla on Saturday July 26, 2025 @03:26AM (#44692129)
At a certain point, the genericized trademark is the correct term, like how aspirin is the correct term (only term, really) for a specific preparation of acetylsalicylic acid, even though it was a trademark of the Bayer corporation.
Re:It's DE9, Not DB9 by ssl-3 on Thursday July 31, 2025 @04:51PM (#44749971)
Yeah. The same thing also happened to heroin, which was also a trademark of Bayer. ;)
Re:It's DE9, Not DB9 by hhh on Saturday July 26, 2025 @10:46AM (#44694516)
I’ve seen Molex’s part catalogue, and would expect that almost any connector could be a molex part ;)
Re:It's DE9, Not DB9 by fredoralive on Friday July 25, 2025 @01:06PM (#44685490)
It’s the one the diagram of connectors calls “peripheral power connector” but the document doesn’t seem to go into details for it. Basically the original PC drive power connector, so 5.25” drives, older hard discs, optical drives etc. use it, in the latter cases it’s been replaced by the SATA power connector.
Re:It's DE9, Not DB9 by bradfa on Friday July 25, 2025 @10:16PM (#44690729)
ATX should call out Molex Mini-Fit Junior connectors. There are many Mini-Fit.