Re:Cara – High Precision Robot Dog Using Rope
by regularfry on Thursday July 24, 2025 @05:00AM
(#44668580)
Dyneema is much easier to work with, too.
I'm quite fond of bowstring as a material for this sort of thing. It usually has other fibres mixed in with it so it's a little more bouncy than raw dyneema but that's minimised if you get thread that's intended for crossbows. It's usually waxed so there's some friction to it when you're manipulating it, and it's also easy to source.
Re:Cara – High Precision Robot Dog Using Rope
by darksaints on Thursday July 24, 2025 @12:25PM
(#44672617)
He actually used steel cables for his initial prototypes, but steel cables have a problem with rolling fatigue that actually gets worse the larger the diameter...so if a tiny steel cable is not strong enough, you might actually have to change the gear dimensions (and therefore ratios) in order to not fatigue them.
Re:Cara – High Precision Robot Dog Using Rope
by Animats on Thursday July 24, 2025 @01:10PM
(#44673229)
Right. Steel cables have to be oiled internally if flexed frequently. This was a major cause of cable failure in gym exercise machines for decades. Newer exercise machines tend to use synthetic flat straps over pulleys.
Steel cables would work just as well if weight isn't a consideration, but I think Dyneema is likely to be more resistant to abrasion. However, heat produced by any significant dynamic friction will ruin it immediately, as I found to my sorrow. Kevlar is much more heat-resistant, and of course steel is more heat-resistant than Kevlar.