Re:Mini NASes marry NVMe to Intel's efficient chip
by atmanactive on Friday July 04, 2025 @10:33PM
(#44469689)
Which load, 250MB/s? Modern NVMes are rated for ~20x speeds. Running at such a low bandwidth, they'll stay at idle temperatures at all times.
Re:Mini NASes marry NVMe to Intel's efficient chip
by ezschemi on Saturday July 05, 2025 @01:30PM
(#44474200)
Fair point! I agree.
The NAS sits in a corner with no airflow/ventilation and there is no AC here. In the corner it does get 95F-105F in late summer and I did not want to take the risk of it getting too hot.
Re:Mini NASes marry NVMe to Intel's efficient chip
by wpm on Saturday July 05, 2025 @12:36AM
(#44470092)
> (as the whole house slightly shakes when pickup or trash trucks pass by)
I have the same problem, but it is not a problem for my Seagate X16s, that have been going strong for years.
Re:Mini NASes marry NVMe to Intel's efficient chip
by kristianp on Saturday July 05, 2025 @01:05AM
(#44470202)
How does this happen? Wooden house? Only 2-3 metres from the road?
Re:Mini NASes marry NVMe to Intel's efficient chip
by ezschemi on Saturday July 05, 2025 @01:27PM
(#44474184)
Yes, it is a cheaply built wooden house, as is typical in Southern California, from the 70s. The backside of the house is directly at the back alley, where the trash bins and through traffic are (see [1] for an example). The NAS is maybe 4m away from the trash bins.
Re:Mini NASes marry NVMe to Intel's efficient chip
by BeelinkOfficial on Wednesday July 09, 2025 @11:16PM
(#44516841)
Hi, we’ve tested the ME mini under typical workloads using six 4TB SSDs (Samsung, Crucial, and WD), and the system runs cool — temperatures usually stay between 40–50°C, with stable airflow and efficient cooling.
If you have any other questions, feel free to contact our support team at [email protected] — we’re always happy to help!
No issues so far. The system is completely stable. Though, I did add a separate fan at the bottom of the Odroid case to help cool the NVMe SSDs. Even with the single lane of PCIe, the 2.5gbit/s networking gets maxed out. Maybe I could try bonding the 2 networking ports but I don't have any client devices that could use it.
I had an eye on the Beelink ME Mini too, but I don't think the NVMe disks are sufficiently cooled under load, especially on the outer side of the disks.