News for hackers. Stuff that matters.
Re:'OLED and LCD will die out': A MicroLED expert explains how by dangus on Sunday April 06, 2025 @08:38PM (#43606295)
It still sounds like it is many years off.
Re:'OLED and LCD will die out': A MicroLED expert explains how by ahartmetz on Sunday April 06, 2025 @10:27PM (#43606987)
What I don't understand is why there seem to be no "bulk processes". Saw a wafer into (tiny) pieces using a raster, somehow (yes yes...) load them onto a roller, and place them a column at a time. Anything resembling a pixel at a time seems wildly impractical. They actually seem to be that far I guess, because the price per LED is already down to ~0.05 cents ($10k for a 4K display). Lesson: 4K is a lot of pixels ;)
Re:'OLED and LCD will die out': A MicroLED expert explains how by DiabloD3 on Monday April 07, 2025 @06:22AM (#43609730)
We already don't need a crude process like you describe for lighting applications: look up "chip on board" LEDs, or COBs. The brightest single element LED lights you can buy today are all COBs.

What we need is finer COBs that are monitor sized, and wired like a monitor.

Re:'OLED and LCD will die out': A MicroLED expert explains how by mystified5016 on Monday April 07, 2025 @05:23PM (#43616111)
I mean, that's more or less the conventional process for mass assembling PCBs. We use CNC machines that place down each component before the boards roll down the line to batch soldering.

It would be wildly inefficient for large TV panels, and you probably couldn't get enough precision at a reasonable price.

It would make much, much more sense to produce them the way we do LCD panels. The entire panel is manufactured at once with a lithographic process. Ideally, you'd grow the LEDs directly on the substrate.

Then again, the process you suggest is almost what they lay out in the article. The LEDs and circuit elements are raster printed. It's still very inefficient as it takes a long time to raster over an entire panel

Re:'OLED and LCD will die out': A MicroLED expert explains how by rf15 on Sunday April 06, 2025 @10:28PM (#43606993)
I don't get this debate at all, LCD has less burn-in risk. OLED will always be an inferior choice if they can't fix its short lifetime. Or, I guess, this fits well with planned obsolescence: higher fidelity, shorter life time
Re:'OLED and LCD will die out': A MicroLED expert explains how by ycombinatrix on Monday April 07, 2025 @12:38AM (#43607752)
mini LED is a less complicated & more effective technology no? just a bunch of lights in an array.

I think we'll dump LCD when we get good at manufacturing smaller mini LEDs.

Re:'OLED and LCD will die out': A MicroLED expert explains how by pathartl on Monday April 07, 2025 @02:42AM (#43608506)
I don't see how LEDs are going to be that much better than OLED other than less risk of a higher sustained brightness. I got a QD OLED panel 6 months ago and have basically paid it no mind and there's not even a hint of burn in. It does a pretty good job managing the brightness at idle without being distracting, in that when I leave it on accidentally for 4 hours at a static desktop it lowers to 25% brightness to save itself.

I also have an early generation 65" B series LG OLED. I wouldn't say there's burn in per se, but you can notice some inconsistencies at 50% gray. Even still it's more uniform that any LCD display I've seen.

Re:'OLED and LCD will die out': A MicroLED expert explains how by searealist on Monday April 07, 2025 @01:14PM (#43613724)
A LED TV basically lasts forever. An OLED TV will last maybe 10 years max. Often less in practice.
Re:'OLED and LCD will die out': A MicroLED expert explains how by ashoeafoot on Monday April 07, 2025 @01:01AM (#43607890)
Why did apple not pursue it for the watch then?
Re:'OLED and LCD will die out': A MicroLED expert explains how by hinkley on Monday April 07, 2025 @12:54PM (#43613479)
Do microLEDs have thicker backplanes? That'd do it.
Re:'OLED and LCD will die out': A MicroLED expert explains how by pyrophoenix on Monday April 07, 2025 @03:03AM (#43608639)
Even if I’m convinced of that and installed a few…Not for tomorrow that’s for sure!