If everywhere is reachable in under 64 hops, then packets sent from systems that use a TTL of 128 will arrive at the destination with a TTL still over 64 (or else they'd have been discarded for all the other systems already).
Only if you're using PaaS/IaaS providers don't give you low level access to the TCP/IP stack. If you're running your own servers it's trivial to fingerprint all manner of TCP/IP properties.
If you count up from zero, then you'd also have to include in every packet how high it can go, so that a router has enough info to decide if the packet is still live. Otherwise every connection in the network would have to share the same fixed TTL, or obey the TTL set in whatever random routers it goes through. If you count down, you're always checking against zero.
If not, then fingerprinting could still be done to some extent at the IP layer. If the TTL value in the IP layer is below 64, it is obvious this is either not running on modern Windows or is running on a modern Windows machine that has had its default TTL changed, since by default the TTL of packets on modern Windows starts at 128 while most other platforms start it at 64. Since the other platforms do not have issues communicating over the internet, so IP packets from modern Windows will always be seen by the remote end with TTLs at or above 64 (likely just above).
That said, it would be difficult to fingerprint at the IP layer, although it is not impossible.