News for hackers. Stuff that matters.
Re:Efabless – Shutdown Notice by genewitch on Saturday March 01, 2025 @10:49PM (#43227068)
$4600 on ebay for a 7/10nm xilinx versal. So is 130nm/40nm ASIC cheaper than $4600?
Re:Efabless – Shutdown Notice by pclmulqdq on Saturday March 01, 2025 @10:56PM (#43227128)
A few sq mm at 40 nm is about $20k, and you can only configure it once. I think the Versal also gives you more useful gates at that size (thanks to block RAMs and hard multipliers).
Re:Efabless – Shutdown Notice by throwaway81523 on Sunday March 02, 2025 @05:11AM (#43229006)
What about power consumption?
Re:Efabless – Shutdown Notice by pclmulqdq on Sunday March 02, 2025 @01:06PM (#43233164)
The FPGA will have higher static power (running all the overheads) but probably lower dynamic power for the same design. 40 nm is old at this point for high-performance chips.
Re:Efabless – Shutdown Notice by kragen on Monday March 03, 2025 @05:24AM (#43240329)
The static power might also depend on whether the FPGA is an SRAM type or a floating-gate type, I'd think. Does Lattice have any parts fabbed in relatively new processes?
Re:Efabless – Shutdown Notice by pclmulqdq on Monday March 03, 2025 @07:51PM (#43248789)
You're right. Pretty much everything is SRAM now, though. Even the MAX 10 is an SRAM FPGA with a flash-backed storage memory.
Re:Efabless – Shutdown Notice by imtringued on Sunday March 02, 2025 @08:39AM (#43230378)
Re:Efabless – Shutdown Notice by 15155 on Sunday March 02, 2025 @11:59AM (#43232391)
This is a single chip. At scale, the ASIC is absolutely cheaper.
Re:Efabless – Shutdown Notice by throwaway3572 on Monday March 03, 2025 @02:34PM (#43245756)
That price is probably $4600 for one Xilinx Versal.

For the MPW run you would get ~100 parts. When everything is said and done, and you pay for packaging etc., on a MPW run you'll likely pay something like $50K. So ~$500ea

The eFabless price of $10K for a full run, including a packaged part, was an unparalleled deal.