Re:Nvidia's RTX 5090 power connectors are melting
by nyrikki on Tuesday February 11, 2025 @12:51PM
(#43015793)
IIRC the patchwork of laws, standards and regulations across the world for low voltage wiring is what restricted voltage in the 36 V – 52 V range. Some locations treating it as low, some as an intermediate and others treated it as high voltage.
It may be marine market specific, but several manufacturers limit to 36v for even high amperage motors because of it.
Obviously I=V/R will force this in the future though.
Re:Nvidia's RTX 5090 power connectors are melting
by masklinn on Tuesday February 11, 2025 @01:02PM
(#43015939)
USB PD can go up to 48V so I'd assume that's fine from a regulatory standpoint.
Going from 12V to 48 means you can get 600W through an 8-pin with a 190% safety factor, as opposed to melting your 12VHPWR.
Re:Nvidia's RTX 5090 power connectors are melting
by BizarroLand on Wednesday February 12, 2025 @07:32PM
(#43031425)
Not even to mention the fact that the SXM format Nvidia cards have been running on 48-52v power for a few years already.
I guess the problem is not only designing the cards to run on the higher voltages but also getting AMD and Intel on board because otherwise no manufacturer is going to make the new power supplies.