News for hackers. Stuff that matters.
Re:Bold plan: opening 1,000 MHz of federal spectrum to WiFi-... by CamperBob2 on Friday July 20, 2012 @08:35PM (#4273510)
RF receivers typically include a very narrow bandpass filter as the first component after the antenna

Historically true, but as ADCs get better (and more important, cheaper), that will be less and less common.

Software-defined radios with broadband front ends don't play by the same IMD rules as conventional radios, anyway.

Re:Bold plan: opening 1,000 MHz of federal spectrum to WiFi-... by patrickyeon on Friday July 20, 2012 @10:02PM (#4273722)
In my experience, the ADC is far from the limiting factor for linearity in an SDR receiver. The analog components up front (LNA and mixer, especially) are the limiting components. Broadband front ends make it even worse, because it's more likely you'll have an interferer passed through the filtering, even if it's nowhere near (in frequency) your signal.
Re:Bold plan: opening 1,000 MHz of federal spectrum to WiFi-... by Nrsolis on Saturday July 21, 2012 @08:35AM (#4274645)
Don't forget the antenna. In many cases, the antennas themselves have specific polarization and beamwidth/radiation patterns along with SWR that is directly tied to the frequency range of the antenna itself. SDR doesn't change any of this.