Aarke is a bit more expensive, but it's built to last. https://aarke.com/
I also got Luckymoose stainless steel bottles for it because I don't like keeping water in plastic bottles. https://luckymoose.de/
EDIT: Actually they didn't say that, I presumed they did because the Pro model AFAIK is the only one that comes with glass bottles insted of PET. But still, make sure you check that these bottles work with your machine :-) They dont work with mine!
This being HN one can also "void the warranty" by just making the recharge packets yourself with 10ml of baking soda and 10ml of citric acid, both of which one can get in multi-pound containers for ease of assembly. I use something akin to this[1] to keep moisture out of the charge until I need them, and I make them in batches of 30 which takes me 7 minutes for all 30, using any 10ml sized scoops[2]
1: https://www.amazon.com/Goeielewe-Graduated-Transparent-Measu... but with the advantage that I got mine at the $1 store
2: e.g. https://www.amazon.com/GSHLLO-Stainless-Measuring-Ingredient...
That said, I bet my girlfriend has no such qualms :-D so I'll be sure to look into that further for her. Thanks for making me aware of it o/
My current theory is to try and involve a vacuum pump to create a vacuum in the bottle to force more CO2 in but I'm waiting on vacuum oil for my pump to try that out
Anyway, if anyone has positive experiences loading sodastream bottles locally using a CO2 tank, I'd welcome that experience
I'm aware there are hoses that run directly from the CO2 tank into the sodastream but I am not yet on board with its failure cases
You can also find continuous carbonation lids but there are constraints on the water pressure being higher than the co2 pressure. My well water is 30 to 40 and the recommended co2 pressure is about 60.
On the whip (cylinder to cylinder filling tool) you linked, you can only ever equalize the pressure between the two cylinders. Most gas cylinders I've seen start around 2000 or 2200 psi if they were professionally filled (as in by a gas supplier like airgas). If your home brew store used a whip to fill your cylinder, it's going to be below their starting cylinder pressure. Each fill is going to lower the source pressure and generate a lower pressure in the filled cylinder. Vacuuming the cylinder should get more CO2 out of the source, but won't fill the small cylinder more. If I understand correctly, because you're pulling the remaining co2 out, you'll get lower pressure in both cylinders at the end because more gas has to leave the source to equalize the pressure.
Tbh, I'm more scared of the whip than a regulator and a hose after it. If you don't have a regulator on your source cylinder, whatever comes next has to handle the full cylinder pressure. In your case, all parts of the whip are at cylinder pressure. Regulators can handle full tank pressure and make it a safe level for the hoses so that in the event of hose failure, you're only leaking 60 psi (or whatever the regulator is set to).
I used to work with tanked oxygen for torch work (not professionally), but I think the above is correct. If not, please correct me.
Direct into the bottle is the way. You can buy carbonator caps for different bottles from a homebrew store. This is a routine maneuver for homebrewers and the risks are small & well understood if you approach it using their gear, knowledge, and technique.
Once your current sodastream bottles expire you can replace them with something else entirely. Getting the tank and regulator is like 80% of breaking free of their stuff entirely, just finish the process.
I switched because I find that still water not "satisfying" to drink, probably because I grew up damn near addicted to Coca-cola. So, if the choice is between drinking something other than water, because drinking still water drives me crazy, or drinking sparkling water and rolling the dice about my teeth, I chose the latter and so far so good :fingers_crossed:
I flavor it myself by squeezing a bit of lemon or lime (sometimes other fruit) it in.
Looks pretty, works really well, no more lugging heavy sparkling water bottles, and taking away the (many!) plastic bottles I used to go through makes me feel less like an eco-terrorist.
I get my CO2 via subscription in swappable/replaceable bottles. Excellent.