News for hackers. Stuff that matters.
Re:Indoor positioning without WIFI mapping by brittohalloran on Monday July 09, 2012 @08:05AM (#4217718)
Two issues:

1. I have to question the effectiveness of using 'magnetic anomalies' to determine absolute position. Isn't the sensor just reading one value (magnetic field strength)? Couldn't that be anywhere on the map with that value? Do people have to turn it on at a specific starting point?

2. It says 'communicates with the API' while tracking. Most large buildings that I've been in like a conference center have marginal data reception.

Re:Indoor positioning without WIFI mapping by archivator on Monday July 09, 2012 @11:18AM (#4218562)
Regarding 1., my phone reads strength and inclination of the field. I suppose that these two, coupled with a compass, could in theory give enough information to collapse the belief state to a single position. Moving a bit should give you enough data to further ensure precision.

Either that, or WiFi. :)

Re:Indoor positioning without WIFI mapping by brittohalloran on Monday July 09, 2012 @12:15PM (#4218854)
(no expertise here)

How do you get 'inclination' of the field? Is it based on phone orientation? If so then you just opened up a lot more possibilities for position. Also, in this solution the phone doesn't know you're moving. It just sees: magnetic field is changing...

You must have to start it at a specific place, or tell it where you are when you start it (eliminating the 'where am I' use case).

Re:Indoor positioning without WIFI mapping by famousactress on Monday July 09, 2012 @12:43PM (#4218995)
I have some experience with indoor location tech, but not magnetic fields. If I had to guess (and I do) I'd suspect that the algorithm depends on consensus based on traffic/usage. The map's gonna change regularly, but if enough people use the technology you can take the algorithm's guesses for everyone and start to build a confidence weight for your prediction, weed out anomalies, and update your understanding of the magnetic fingerprint of the space over time. I'd also assume it uses GPS to get your bootstrapped whenever possible, ie: sort out what entrance you came through, use pathfinding over time to get some limit the possible locations you might be in currently.
Re:Indoor positioning without WIFI mapping by jrockway on Monday July 09, 2012 @07:56AM (#4217690)
How well does this work? I've never even had much luck getting my phone to detect "north" as accurately as a $3 compass.
Re:Indoor positioning without WIFI mapping by bcl on Monday July 09, 2012 @09:44AM (#4218113)
What happens when you move large metal objects around? Say a large file cabinet or a safe? The local 'anomalies' are going to change.
Re:Indoor positioning without WIFI mapping by Zenst on Monday July 09, 2012 @10:25AM (#4218320)
Given that mobile phones have wires and electricity then they are creating small magnetic waves which will impact others.

That all said this technolody is very suitable for underwater GPS were a GPS signal does not penetrate the water due to weakness and how bad radio travels thru water in general.

So given that I would have to questions if the military don't already use something very similiar in submarines. Lets say I'd be very supprised if this was not being already utilised in some form or another in that feild.

Re:Indoor positioning without WIFI mapping by dangrossman on Monday July 09, 2012 @08:03AM (#4217713)
There's already a front-page discussion of this:

http://news.ycombinator.com/item?id=4217329

Re:Indoor positioning without WIFI mapping by stevejabs on Monday July 09, 2012 @09:33AM (#4218039)
I find it hard to believe that they have legit Trademarks on the phrases "Floor plans" and "Map Creator".

http://www.indooratlas.com/technology.html

Re:Indoor positioning without WIFI mapping by jrockway on Monday July 09, 2012 @09:55AM (#4218169)
I did a US trademark search and did not see anything of theirs for "floor plans".
Re:Indoor positioning without WIFI mapping by samwillis on Monday July 09, 2012 @11:10AM (#4218520)
There wouldn't be, its a (TM) not an (R).

A (TM) is for an unregistered trademark, you own the IP of it though your use of it in the marketplace. This is what they have, and in fact anyone could have. In reality the (TM) is there to indicate you intention to protect it.

An (R) is for the registered trademark, as the name suggests you register it with your local trademark authority. It provides grater protection and is easer to take people to court over the misuse of.

Re:Indoor positioning without WIFI mapping by cdmckay on Monday July 09, 2012 @11:21AM (#4218580)
(TM) also means that you've submitted a trade-mark application.
Re:Indoor positioning without WIFI mapping by jimbobimbo on Monday July 09, 2012 @05:26PM (#4220596)
Not necessarily: "In the United States, neither federal nor state registration is required to obtain rights in a trademark. An unregistered mark may still receive common law trademark rights. Those rights, for example, may extend to its area of influence—usually delineated by geography. As such, multiple parties may simultaneously use a mark throughout the country or even state. An unregistered mark may also be protected under the federal "Lanham Act" (15 USC § 1125) prohibition against commercial misrepresentation of source or origins of goods. Unregistered marks are also protectable in the United States under Lanham Act §43(a)."

http://en.wikipedia.org/wiki/Unregistered_trade_mark