Re:A programmable FPGA SoM in the tiny microSD form factor
by mechagodzilla on Friday November 15, 2024 @07:02PM
(#42152800)
It's got 128KB of on-die SRAM - you could have a Z80 and a 6502, both with a full complement of SRAM!
Re:A programmable FPGA SoM in the tiny microSD form factor
by ruslan on Friday November 15, 2024 @09:18PM
(#42153566)
Lattice's FPGAs are very nice. With an iCE40 you can have a full featured RISC-V soft-core (RV32IMFAC) at some 80 MHz.
Re:A programmable FPGA SoM in the tiny microSD form factor
by wyager on Monday November 18, 2024 @03:56PM
(#42176920)
For a lot of the iCE40 chips, it's extremely difficult to reliably get fMax > 50MHz even with extremely aggressive pipelining. I assume 80MHz is only possible on the highest-speed parts in the iCE40 family
I switched a design from iCE40 to ECP5 and got a ~3x speedup "for free"
Agreed that using Lattice FPGAs is super nice, mostly because you get to use the open-source Yosys toolchain, which is vastly better than proprietary toolchains IMO
Re:A programmable FPGA SoM in the tiny microSD form factor
by Neywiny on Monday November 18, 2024 @05:51PM
(#42177982)
Agreed. Not enough processing power for anything onboard, no IO out the back (seems like a missed opportunity tbh) for expansion to do fun things. Not sure what I'd do with this.
A quick search shows Hirose has a 0.5mm tall FPC connector that could fit 25 contacts within the width. Looking at their pictures, they have some spare height (unsure if enough though) and depth to move components forward. Even with good grounding, idk 12 IO is a decent amount.
The website claims hardware acceleration and... I doubt they got timing closure on the soft CPU at anything greater than 100MHz and you still have to get data to/from it at likely 30~40 MB/s via an SDMMC bus.