Re:Reconductoring: Boosting U.S. Grid Capacity Efficiently
by tuatoru on Wednesday September 25, 2024 @05:17PM
(#41651983)
Skin effect is a high-frequency thing. From memory the down-rating tables start at 100 kHz.
Re:Reconductoring: Boosting U.S. Grid Capacity Efficiently
by Kirby64 on Wednesday September 25, 2024 @05:32PM
(#41652096)
Skin effect works at all frequencies besides DC. At 60 Hz it’s 8.5mm. So, solid conductors thicker than 17mm have some skin loss. You can mitigate this by winding multi strand wire in a particular way, though.
It isn't clear from the text, but the wires might not actually be any heavier, given that they replace the steel core with a composite.
Aluminum is about 2.7 g/cm^3, whereas steel is around 7.85.
I'd imagine they can switch to a slightly smaller cable size if they have to keep to the original weight and a new cable happens to be a little heavier at the same diameter.
I'm kind of surprised they don't lose the advantages of stranded cable when switching to something that looks more like a solid cable. As I understand it, for AC wiring you usually want a lot of strands because most of the current tends to travel on the surface. Maybe that's less of a thing for high voltage. Or maybe the seams between the strands are enough to cause the skin effect even if they're tight-fitting.