Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by topazas on Tuesday September 24, 2024 @03:00AM
(#41633805)
Awesome, but what does 1'' mean? Some weird measurement unit?
[ Parent
| on HN ]
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by unwind on Tuesday September 24, 2024 @04:16AM
(#41634331)
It's awesome that they combine 1" pipe with a 5 mm hex [1] (often "Allen" in the US) fastener. :)
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by bluGill on Tuesday September 24, 2024 @09:26AM
(#41636223)
The actual size is 27mm. If you convert to an imperial system the size is not a nice number.
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by gibspaulding on Tuesday September 24, 2024 @10:25AM
(#41636786)
You see a lot of this in the bicycle industry. There are a lot of older standards in use like 9/16” pedal threads, 1 1/8” steerer tubes or 1” (25.4mm) handlebars but any new standard is metric - so bottom brackets, wheels, newer seat post diameters are all metric. It can make for some very strange looking spec sheets.
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by LukeShu on Tuesday September 24, 2024 @03:07AM
(#41633859)
" is imperial inches, ' is imperial feet.
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by Modified3019 on Tuesday September 24, 2024 @03:09AM
(#41633871)
1" is one inch
1' is one foot
So yeah, a weird measurement unit. Technically the symbol to be used is a prime symbol (https://en.m.wikipedia.org/wiki/Prime_(symbol)), but what’s used in practice is anything that looks close enough.
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by wezdog1 on Tuesday September 24, 2024 @07:11AM
(#41635293)
/s might have been needed, it appears.
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by hnuser123456 on Tuesday September 24, 2024 @07:48AM
(#41635506)
That would be 2.54 times 1/100th of the length travelled by light in a vacuum in 1/299792458 of the time it takes a cesium-133 atom to make 9192631770 ground-state hyperfine transitions, if you prefer.
Re:Maker Pipe – Structural Pipe Fittings for DIY Builders
by bluGill on Tuesday September 24, 2024 @09:25AM
(#41636214)
Wrong!
While there is a 1 inch measure in common use that is as you described, the subject here is EMT. There is no dimension in EMT that is 1 inch by the system you describe. The diameter is close to 1 inch, but it is noticeably different to the naked eye, and for all useful purposes different enough that anything actually 1 inch in diameter is not compatible.