For just the automotive industry, there are 120 injection molding contractors in Michigan alone. Onshoring and reshoring are desired for really customer facing parts -- you spend a lot of weight on packaging to mitigate scratches when you produce abroad then assemble domestically.
Staying with automotive, electrification is driving the injection molding industry -- as your weight shifts to "big battery with a shell around it" more of the total components of a vehicle are injected.
Zooming out of automotive, biomedical device packaging is a huge injection molded business that's stayed in the US and is growing.
In a robotic packaging scenario most of the time is spent by the robot picking up the objects and moving them, so for a 30 second cycle we usually get less than a second to take multiple pictures and make a decision about the part. For a smaller number of images - like 4 - it's pretty easy to handle with cheap hardware like an Orin Nano or Orin NX. If we've got more images (like 8) and a tight time budget (like less than 2 seconds) we'd usually just bump up the hardware, like going to a higher tier of Nvidia's line of Orins or using compute with an RTX 4080 GPU or equivalent in it.
I have seen machines with visual pressure curve output on the operator screen for each part. I also think some machines have automatic pressure monitoring already built into the machine control, but it's certainly not transformer model based.
I didn't know they were using resin molds, that takes cheap aluminum prototype scale up mold to a whole new level.
Last time I checked, the mold design software itself has the same UI as 1999 AutoCAD.
How many images/angles can you effectively sample and compare on that hardware in a 30 second cycle time? How would you process images from more than one camera? If you have 8 cameras, can the defect recognition software run on 8 threads?
Are injection mold operators mostly located in low labor cost areas? Is any reshoring happening?