Are you planning to build such a machine for your personal home use? If so you should be aware that (a) you might find server hardware hasn't thoroughly tested compatibility with things like suspend; (b) you might find games haven't thoroughly tested compatibility with multi-GPU setups; and (c) you might find the idle power consumption is 200W or more, even while doing nothing.
That is good to know multiple phases can work. Perhaps there would still be a fire risk in case of a short? Like somehow bridging the circuits > breakers don't trip?
Something to keep in mind though is that (at least with consumer-grade PSUs) it is not safe to simply tie the outputs together, even if both PSUs produce 5V, 12V, 3.3V, etc. The voltages will be slightly different and connecting them together will cause current to flow back into one of the PSUs.
You can still use this setup though, the key is that the GPUs do not (or should not) connect the motherboard voltage provided via the card slot to the voltage provided via the power connector. This detail allows you to safely power the motherboard from one PSU and power the GPU from another one, you just have to be careful not to mix connectors on the same card between different PSUs (if it has multiple). Additionally the motherboard should be entirely powered from a single PSU.
I've been looking for a proper answer to this for a while, because I want to build a similar machine with 8 GPUs (~4500W max load) which would need to be split between two 16A 230V circuits.