News for hackers. Stuff that matters.
Re:Never Too Late To Learn An Instrument by nostrademons on Monday December 29, 2008 @03:40PM (#413410)
What I did in college was to run the guitar through a digital effects board and then into my cheapo computer speakers (which could be set to reasonable volume levels) or into headphones. Sound quality isn't as great, of course, but the digital stuff doesn't really care how loud you play and sounds about the same at all volume levels. You could get some pretty decent tones out of the higher-end effects boards, too.

If you want sweet tube amp sound, you're basically out of luck. That's caused by the power tubes and speakers distorting (not the pre-amp tubes), so you've gotta crank them up to 11.

There're also some products available that cut the power ratings on standard amplifiers. When I was into this stuff around 1998, your options were basically limited to YellowJackets (which let you substitute 18W EL84 tubes for EL34 amplifiers, like 50W and 100W Marshalls) and the PowerSink, which was an induction coil that would bleed off excess power as heat before it reached the speaker. Both of these would only cut the noise level from "will blow your eardrums out" to "will annoy the neighbors", and so weren't really suitable for apartments or dorms. Since then, I've heard that a bunch of manufacturers have wised up that there's a huge market in low-power tube amps, and it looks like you may be able to find 1-5W tube amps out there now.

Re:Never Too Late To Learn An Instrument by Shooter on Tuesday December 30, 2008 @01:05AM (#413993)
There are definitely many more low-power tube amps available now. There are some really neat ones in the 1.5 watt config. Even still, I think there is room in the market for more.

If you already have a larger tube amp for gigs and are obsessive about the tube tone, I'd recommend searching for "power scaling" and "amp attenuator." You'd be very surprised with the sounds you can achieve at decent volumes. You can buy amps with power scaling built in or you can retrofit the circuit. Attenuators vary in quality, but they are easy to use external devices. I'm addicted to tube amps...and I used to like playing in my office in downtown Chicago to blow off steam. I often used a 30 watt amp with an Air Brake (attenuator) and I never got into any trouble because of the noise. I was able to use the same amp to play a gig in Grant Park on a Saturday and then to play in my 10 X 12' office on Monday.