I fixed my device tree problems on NixOS by PXE-booting the RPi4, so I get to handle the dtbs using a TFTP server: https://discussion.fedoraproject.org/t/fedora-coreos-device-...
For NixOS specific instructions, see https://juuso.dev/blogPosts/ipxe-rpi4/ipxe-nixos-edk2-uefi-b...
Disclaimer is that nowadays I moved on from ARM (at least for non-UEFI systems), because I feel like working with the preboot environments is just not worth the hassle if you need to reliably boot remote servers.
For the record I just got it working with https://github.com/Mic92/nixos-aarch64-images/commit/04092fc... and making sure the tow-boot version is up to date.
If you're using random ARM boards (even well known ones), the way I've found most useful (since I seldom use them as desktops anyway) is to install a minimal Armbian (or similar, with barely anything besides the networks stack) and use LXC/LXD - https://taoofmac.com/space/blog/2024/07/18/0900
I tried systemd-nspawn which is similar but NixOS will complain about sandboxing if run from any kind of container layer. Fedora 40 works for me without any workarounds. It runs on a very recent 6.9x kernel with bcachefs and everything so at this point I’d rather just install nix on top of it.
You need to have the particular configuration I have on my post:
imports = [ <nixpkgs/nixos/modules/virtualisation/lxc-container.nix> ];
boot.isContainer = true;I've since gone and figured out how to do it on Proxmox as well after lunchtime: https://taoofmac.com/space/blog/2024/08/17/1530
can you use gui stuff that way? X/Wayland?
Well, I use xrdp almost as a rule, but theoretically you _could_ map the hardware devices and run them from the container--I've seen it done before.
incidentally, I had trouble running webots on a virtual x server, but plugging in a fake hdmi monitor allows it to work fine over vnc.
Don’t use VNC. It is horrendously slow compared to RDP.
thank you, will give that a go!
Pro tip: install xorgxrdp (or xorgxrdp-glamor on Intel) and disable the VNC back-end on /etc/xrdp.ini
Meanwhile Fedora 40 installs like a champ from the default aarch64 iso with just a warning about EFI variables (which is expected since tow-boot is not really providing a complete uefi environment).
I suspect it’s probably some voodoo formula to manage the device trees. Those github flakes to generate imsges are pulling an entire root tarball from hydra so I’m assuming there is something done there that is not obvious.