News for hackers. Stuff that matters.
Re:Making My Own Wedding Rings by filipezf on Monday July 08, 2024 @07:51PM (#40911045)
I have a cute somewhat related story. I wanted to make really unique rings, so I decided to make them from some random metal from the forgotten realms of the periodic table.

I asked for a site that sells many rings of many different metals, with no luck. THIS metal, it turns out, is really difficult to cast. After many months with the idea shelved, one day my girlfriend found some chinese company that managed to do them. US$ 2k rings, and ugly as hell... but at least unique!

The girlfriend soon left me, but, well at least I still had the rings... until a few weeks ago when I noticed that I lost them too. C'est la vie :-)

Re:Making My Own Wedding Rings by ggreer on Monday July 08, 2024 @08:41PM (#40911426)
What metal were the rings made of?

When researching for this project, I did look up the densest metal possible: Osmium. Osmium has density of 22.59g/cm^3, which is 17% greater than gold's 19.28g/cm^3. (For comparison, lead is 11.34g/cm^3 and silver is 10.5g/cm^3.) Sadly Osmium melts at 5500ºF and can form toxic vapors, so making a ring out of it would be impractical.

Re:Making My Own Wedding Rings by bastawhiz on Monday July 08, 2024 @09:27PM (#40911680)
Gold is 19.32, tungsten is 19.28.
Re:Making My Own Wedding Rings by ggreer on Tuesday July 09, 2024 @12:30AM (#40912541)
I just used the numbers from Wikipedia, which says that gold is 19.283g/cm3 and tungsten is 19.254g/cm3.

1. https://en.wikipedia.org/wiki/Gold

2. https://en.wikipedia.org/wiki/Tungsten

Re:Making My Own Wedding Rings by adrian_b on Tuesday July 09, 2024 @05:38AM (#40914129)
Iridium has almost the same density as osmium (indistinguishable without precise instruments) and unlike osmium or rhenium it is neither toxic nor radioactive (even platinum is very slightly radioactive).

So iridium would be the safest among the densest metals for contact with human skin.

Unfortunately, not only iridium is very expensive, but it is extremely difficult to shape, being much harder and much less ductile than platinum (and its melting point is also much higher).

Platinum-iridium alloys are much easier to shape than pure iridium, but still much more difficult than pure platinum. In the second half of the 19th century, when new standard meters and kilograms were made for distribution in all countries and to replace the original standards made of pure platinum, an alloy of platinum with 10% iridium was chosen, as the most resistant metal to mechanical and chemical degradation that was known at that time but for which it was still possible to process it into a given size and shape.

Re:Making My Own Wedding Rings by filipezf on Tuesday July 09, 2024 @12:53PM (#40918219)
Tm. I checked that it seems to be non-toxic, and don't corrode as much as the siblings. The issue is that its melting and boiling point are very near.
Re:Making My Own Wedding Rings by whartung on Tuesday July 09, 2024 @10:52AM (#40916840)
There's a fascinating video of a fellow trying to make a ring out of Purple Gold.

https://www.youtube.com/watch?v=d6Pcp944sRI&pp=ygUQcHVycGxlI...

No, I hadn't heard of purple gold either.