Re:Show HN: I made a split keyboard for large palms
by jogme on Thursday July 04, 2024 @04:08PM
(#40877677)
I like the T-34 layout[0] - I like how much 'science' (research) did he put in it. An another one is the callum layout[1].
There is an option with QMK to rediscover TRRS cable when it gets disconnected or is plugged after startup, but I see now that that's not the only problem. TRRS is an easy/cheap solution, but a dangerous one if not correct.
[0] - https://www.jonashietala.se/blog/2021/06/03/the-t-34-keyboar... [1] - https://github.com/callum-oakley/qmk_firmware/tree/master/us...
The issue with TRRS is that you can easily damage your controller(s?) if they’re powered while the TRRS cable is either unplugged or left in a “not quite 100% plugged in” state, as the metal contacts in the connector create a short (between data and power IIRC?) when mid-way plugged in.
I recently fried a controller this way because I didn’t realize that the TRRS connector had gotten slightly yanked and was ~90% plugged in, creating a short, and the controller has been busted since.
In general the advice is “never plug/unplug TRRS while your keyboard is powered” and “always check to make sure TRRS is fully seated”, but in practice it’s easy to make a mistake that requires replacing your controller (and desoldering it if you didn’t socket it, oops).