No one is trying to pass aluminum or steel as titanium.
It's pretty straightforward to pass one titanium alloy as another, or claim provenance or material properties it doesn't have. I have two indistinguishable scrap pieces on my desk right now, one Grade 5 and one Grade 2. It's also possible to pass a billet or sheet of alloy with defects or poor quality control, voids, or inclusions. "Titanium" is a broad class of materials that are indistinguishable without exotic tools like XRF guns, or, in this case, a well documented and trusted supply chain.
Alloy substitutions and similar fraud happen all the time. It can even be the same alloy but have issues in post treatment and not meet spec. Here's a case where a NASA supplier was committing this fraud for over 20 years. It included fraudulent documentation, but the material itself was not up to spec:
https://www.sciencealert.com/a-supplier-was-delivering-fault...
Sure, but per my actual point: characterizing the wrong alloy as "counterfeit titanium" is misleading, no? If I hand you a nickel when you expected a quarter, did I give you "counterfeit money"? No, I gave you the wrong thing.
Cheating on material provenance is fraud. It's not "counterfeiting", and for a journalist to claim so is misleading spin. A counterfeit is something deliberately constructed in imitation of something else, it's not just a low grade substitute.
But what if the lower grade substitute was specifically produced with the goal in mind of passing it off as this other kind?
Imagine the rabbis at Hebrew National were out sick, but Hebrew National continued churning out “Kosher hotdogs” that hadn’t been properly vetted.
Sure it’s still a hotdog made with kosher ingredients. But it’s a major violation of trust. And trust is what consumers expect when flying.
Metals come in various grades. That comes down to chemical purity, in case of commercially pure, and consistency, in case of alloys. But also crystal structure of the metal.
https://www.independent.co.uk/news/world/americas/boeing-air...
Now, it could be ersatz titanium, except that the article specifically says that it isn't:
> Spirit added that “more than 1,000 tests have been completed to confirm the mechanical and metallurgical properties of the affected material to ensure continued airworthiness.”
and
> Boeing said in an emailed statement: "This industry-wide issue affects some shipments of titanium received by a limited set of suppliers, and tests performed to date have indicated that the correct titanium alloy was used."
I agree with a sibling comment that this is probably about evading sanctions on Russian titanium, which is produced in such quantity that the US obtained it through intermediaries to build the SR-71 Blackbird.
It's also possible that these are counterfeit titanium parts, as in, real titanium, but not from the source that the documents claim. The article doesn't make that clear one way or the other.
> It's also possible that these are counterfeit titanium parts, as in, real titanium, but not from the source that the documents claim. The article doesn't make that clear one way or the other.
The parts were made by Spirit (so not counterfeit) using the "counterfeit" titanium. Both articles are discussing the provenance of the titanium used by Spirit (and others, but this article focuses on Spirit), not the provenance of parts made of titanium.
Russia is what, third on the list of countries by titanium production? [0] Japan produces more. China produces quite a lot more. It should not be -that- hard to avoid using Russian titanium.
[0] https://en.wikipedia.org/wiki/Titanium_production_by_country
Which they might do, if sanctions meant that the titanium was cheaper, and they could pocket the difference.
Seems implausible. Again, Ti is way out on the edge of properties, being intermediate between steel and aluminum in weight and stiffer than either. That alloy would be a pretty novel thing, and novel metallurgy is more expensive than the hot Titanium someone stole from a bomber graveyard in Siberia.
Outside of medical usage I think most commercial use of "titanium" is actually titanium alloys.
I'm sure I read somewhere there's over 50 commercial grades so substituting one for another close but cheaper grade with forged paperwork is very plausible.
It's not really feasible to fake something like a raw metal. Nothing else looks like titanium, nothing has the weight properties, even things like smells are different between metals that come out of different processes and tarnish in different ways. Basically by the time you got something that wouldn't be noticed by the assembly crews you'd have spent so much you might as well just have bought stolen titanium on the black market.