News for hackers. Stuff that matters.
Re:Why three prongs? by X-Istence on Saturday June 02, 2012 @08:09PM (#4059621)
This isn't for in the wall, but outside of it...

For example you plug in a drill but it slowly works its way out, you are working with a screw driver against the wall and accidentally drop it, at this point the screw driver can come to rest on the live pins of the drill that is plugged partially into the wall. With the ground pins up the screw driver will pick a side and fall off...

Re:Why three prongs? by dubya on Saturday June 02, 2012 @11:17PM (#4059933)
You can try it yourself by dropping a bit of pencil lead across the prongs a slightly unplugged plug. You get a flash and it hops away, but I don't know that a piece of metal would break contact. I don't recall this ever even tripping a breaker, but be careful.
Re:Why three prongs? by X-Istence on Sunday June 03, 2012 @12:31PM (#4061132)
If you want a nice flash, take some low resistance half watt or even quarter watt resistors, place in power strip, plug power strip in ...

Ah, so awesome.