Hurricane Electric has a pretty decent IPv6 self-study certification program.
Re:DHCPv6-PD – First Steps
by hairyplanter on Thursday June 06, 2024 @02:48AM
(#40594308)
I haven’t seen one. Openwrt seems to do the right thing out of the box, but that’s not that helpful in setting up your own and learning on the way.
Maybe I will write one this weekend and make a hn post.
For a typical network you usually don't need to do anything. For a geek's network it depends exactly what you're wanting to geek out on. E.g. NAT64 will do what you're looking for at the end (with some caveats depending on what else you're wanting to geek out on) but it's more a carrier focused solution so you don't find as much info about it when reading about consumer tutorials and vice versa.
As for the actual configuration you'll want something specific to your exact network device as learning any of it with a guide for how another device expects the configuration to be entered will be hair pulling.
Re:DHCPv6-PD – First Steps
by hairyplanter on Thursday June 06, 2024 @09:24PM
(#40604400)
I wrote one: https://news.ycombinator.com/item?id=40603777
Re:DHCPv6-PD – First Steps
by yjftsjthsd-h on Thursday June 06, 2024 @09:41PM
(#40604492)
Thank you; that helped:)
[0] Ideally pure v6 if possible; I think there's some way to encapsulate/NAT v4 traffic out from a pure v6 network so I don't actually need dual stack.