News for hackers. Stuff that matters.
Re:Electromigration Concerns Grow in Advanced Packages by brian_herman on Monday April 29, 2024 @10:21PM (#40206606)
Is this caused by quantum tunneling?
Re:Electromigration Concerns Grow in Advanced Packages by tedsanders on Monday April 29, 2024 @11:24PM (#40206918)
No.

Imagine sledding down hillside covered in gravel. Friction imparts momentum from your sled to the gravel, causing a few pieces to slide forward with each ride down the hill. With a thin enough layer of gravel, and with enough ride down the hill, you can end up with bare patches with no gravel.

In this loose analogy, the gravel is atoms in wire. The sled is an electrical impulse. Maybe there's some tunneling that takes place when the gravel moves from one site to another, but I'm not sure.

(I once had a job offer from Intel to work on electromigration in next gen chips, but didn't take it, so I don't know much beyond the basics.)

Re:Electromigration Concerns Grow in Advanced Packages by beagle3 on Tuesday April 30, 2024 @03:38AM (#40208217)
I vaguely remember this being discussed in a semiconductor course at uni (back in 1996 or so) - it was already an issue at the time in the smallest processes, and IIRC the prevailing approach then was to make sure that current flows both ways in the specific connections that were prone to electromigration - thus replenishing the supply.
Re:Electromigration Concerns Grow in Advanced Packages by badcppdev on Tuesday April 30, 2024 @08:18AM (#40210208)
If the erosion is a statistical process then I assume that having the current flow both ways just slows down the erosion by some factor. I assume you could estimated it using some variant of the random walk statistical model.
Re:Electromigration Concerns Grow in Advanced Packages by smaddox on Tuesday April 30, 2024 @11:40AM (#40212270)
It was a major issue with aluminum interconnects. It was primarily addressed by switching to a different metal that exhibits less electromigration, namely copper. But you have to be careful putting copper in a silicon fab, because if it gets into the silicon channel, it kills device performance (copper doping induces a deep trap in silicon).