News for hackers. Stuff that matters.
Re:A near 100pct renewable grid for Australia is feasible an... by exe34 on Thursday March 28, 2024 @08:13AM (#39850250)
Do you have any insulation? I'm in the UK, and my previous rental had walls that leaked any heat within half an hour, but my current one, it heats up to 23 in the day due to the large windows facing the sun, and barely drops to 18 at night when it's 5-10 degrees outside.
Re:A near 100pct renewable grid for Australia is feasible an... by patchtopic on Thursday March 28, 2024 @08:34AM (#39850460)
I have a "normal" Melbourne brick veneer home, with decent roof insulation and insulated curtains. It handles the heat well for 1 day but a 2 or 3 day heatwave of 38 degree plus temperatures the bricks heat up in the sun and it gets quite uncomfortable even at night.
Re:A near 100pct renewable grid for Australia is feasible an... by kampa on Thursday March 28, 2024 @09:36AM (#39851236)
outside sun shield like German houses have is the way to go. Any curtains inside does not work very well
Re:A near 100pct renewable grid for Australia is feasible an... by llm_trw on Thursday March 28, 2024 @08:15AM (#39850269)
>Do you have any insulation?

No, this is Australia. Houses are more like tents than actual buildings.

Re:A near 100pct renewable grid for Australia is feasible an... by _kb on Thursday March 28, 2024 @08:24AM (#39850362)
Tents are sturdier.
Re:A near 100pct renewable grid for Australia is feasible an... by throw0101b on Thursday March 28, 2024 @08:30AM (#39850407)
> No, this is Australia. Houses are more like tents than actual buildings.

Pre-AC being ubiquitous (or being invented), the way for people to cool off in summer was to have airflow. Insulation was a more of a cold climate thing, as keeping the heat in / cold out was more intuitive when burning wood or coal: thermal boundaries were more 'needed' when there was snow outside.

Having thermal boundaries in your structure didn't make sense when it was as hot inside (due to lack of AC) as it was outside, and it has only been in recent years that people clued into that fact. But unfortunately there's a large stock of housing around that was built pre-clue in.

Even now there are people who insist that houses need to "breathe", i.e., have holes / be drafty. They do not:

* https://www.energyvanguard.com/blog/Myth-A-House-Needs-to-Br...

* https://www.greenbuildingadvisor.com/article/most-houses-tha...

* https://www.greenbuildingadvisor.com/article/buildings-dont-...

Buildings need to be as air tight as possible, and be ventilated through mechanical means so that stale air is vented out and fresh air is brought in after being filtered and tempered (via an ERV).

Re:A near 100pct renewable grid for Australia is feasible an... by masklinn on Thursday March 28, 2024 @09:55AM (#39851495)
> Pre-AC being ubiquitous (or being invented), the way for people to cool off in summer was to have airflow.

Modern A/C was invented in 1901, and A/C penetration in Australia is not that far behind the US.

But much as in Texas where houses are also made of paper and cardboard, cheap energy has made forcing temps down via AC much simpler (for property developers).

Re:A near 100pct renewable grid for Australia is feasible an... by sandworm101 on Thursday March 28, 2024 @09:21AM (#39851020)
>> Buildings need to be as air tight as possible

Perhaps in California, Australia or other desert areas. The pacific northwest had major issues when OSB met the concept of "air tight" housing. No airflow in/through walls leads to condensation, mold and collapse of many "engineered" wood products held together with glue.

Re:A near 100pct renewable grid for Australia is feasible an... by throw0101b on Thursday March 28, 2024 @09:58AM (#39851547)
> The pacific northwest had major issues when OSB met the concept of "air tight" housing. No airflow in/through walls leads to condensation, mold and collapse of many "engineered" wood products held together with glue.

These are not indicators that air tightness is bad, but rather that people don't understand building science. Washington state (for one) has mandated air tightness levels (§R402.4.1.3) and testing (§R402.4.1.2):

* https://sbcc.wa.gov/sites/default/files/2023-04/2021_WSEC_R_...

Air tight passive houses are built without issues in the US PNW:

* https://phnw.org

* https://hammerandhand.com/high-performance/passive-house-bui...

* https://asiri-designs.com/f/how-to-design-an-energy-efficien...

The province of BC is mandating near-passive house levels of air tightness:

* https://www.energyadvisor.pro/airtight-energy-advisor-contac...

* https://energystepcode.ca/how-it-works/

* PDF: https://www.bchousing.org/publications/Illustrated-Guide-Ach...

Build your structure according to how physics works and it will work just as well from the tropics (IECC Zone 1) to the arctic (IECC Zone 8):

* https://buildingscience.com/documents/insights/bsi-001-the-p...

* https://basc.pnnl.gov/images/iecc-climate-zone-map

Air tightness is coming to building codes everywhere, and if you can't make it work then you shouldn't be building because you are incompetent:

* https://www.iccsafe.org/building-safety-journal/bsj-technica...

Re:A near 100pct renewable grid for Australia is feasible an... by Qwertious on Thursday March 28, 2024 @10:11AM (#39851713)
You massively overestimate how deserted Australia is. Most of the population of Australia lives in the greener areas near the coast, which has a much more moderate climate.

...also I doubt anyone from e.g. Brisbane would need to be told about mold and condensation.