News for hackers. Stuff that matters.
Re:How to Build Your Own Injection Molding Machine by londons_explore on Sunday January 21, 2024 @04:09AM (#39076860)
I wonder if it might be possible to make moulds out of other materials for hobby-scale things?

For example, a mould which is made of plaster/concrete with an inner layer of silicone?

That would be pretty easy/cheap to manufacture. You'd use a 3d plastic printer ($150), dip the print in casting silicone, then float the result in concrete, with the concrete surface being the parting line.

Then use a scalpel to cut the silicone along the parting line and add more concrete to make the other half of your mould.

Re:How to Build Your Own Injection Molding Machine by SOLAR_FIELDS on Sunday January 21, 2024 @10:46AM (#39079451)
The design the buster beagle uses is an aluminum box you drop your molds into after printing them. Though this idea is interesting, I think, for people who are injecting with variable size molds that a single casing would not suffice for.

A desktop CNC at that scale to make simple stuff like casing boxes is probably going to be more affordable and less hassle/mess than your suggested setup pretty quick though.

Desktop is definitely not going to be good enough to make aluminum molds themselves though. I think you need a 5 axis CNC for that. Surprisingly my makerspace actually has one of those and I considered learning how to use it but decided against it.

In practice however on these molding setups I’ve found you are already kind of constrained on your mold sizes a lot simply by virtue of your machine’s volume capacity. The one I have goes up to 3 cubic inches, but in practice you can’t use all of that capacity and you get weird/bad results for too small of capacity too so the actual ranges of shot volume I can produce in a mold are actually constrained to something like 1-2.5 cubic inches