Re:How to Build Your Own Injection Molding Machine
by zonkerdonker on Sunday January 21, 2024 @02:17AM
(#39076369)
I think small[er] scale injection molding has a ton of potential for local/recycled/lower volume projects that 3d printing isn't necessarily suited for. Brothersmakes [1] sells recycled plastic combs and more using a similar process, products that really wouldn't work well with any modern 3d printer. I've seen similar projects for disc golf discs as well from TrashPanda. [2] The market for hyper-local small scale products is growing, and I think downscaling injection molding fits in well to this. I could order a custom steel mold (that I've designed) from a machine shop for a few hundred bucks, and with an injection machine and a supply of some plastics, conceivably make a few thousands parts on a relatively short time scale, with minimal manual labor.
[1] https://www.brothersmake.com [2] https://youtube.com/@TrashPandaDiscGolf?si=LWdw3gV9rtNQdlUD
Re:How to Build Your Own Injection Molding Machine
by iancmceachern on Sunday January 21, 2024 @03:54PM
(#39082942)
Thank you for this! I just started exactly this! I bought a couple injection molding machines and started Golden Gate Molders. We injection mold parts right here in the SOMA neighborhood of San Francisco! Not only do we use traditional metal tools, we also provide 3d printed tooling options for lower volume prototype tools.
www.goldengatemolders.com
Re:How to Build Your Own Injection Molding Machine
by zonkerdonker on Thursday January 25, 2024 @02:10AM
(#39127029)
Very cool, just subscribed to your mailing list. As a mechanical design engineer, I'm a bit jealous! Good luck with your endeavor
Re:How to Build Your Own Injection Molding Machine
by SOLAR_FIELDS on Sunday January 21, 2024 @09:49AM
(#39078910)
If your part is small enough you can do small scale (several hundreds to low 1000s) of your units in house for a machine so cheap money wise to build that it’s better than outsourcing even without the QC concerns. Also even prototyping sometimes gets old on the 3D printer when you have a 5 hour per you need to make 10-20 of that you could do in an hour with the molding machine.
Though IMO faster prototyping is not a good reason for getting a molding machine, it’s just a nice bonus. There are plenty of shops in the USA you can send your STL file to and they will print a bunch of them for a reasonable price. The real reason that you want a molding machine is fast small scale production runs because oftentimes what you produce on a 3D printer is either not professional looking enough to sell (the lines look very hobbyist) or FDM cannot achieve your product requirements long term (outdoor plastic enclosures, for example, need waterproofing with FDM but not with molded parts)
If you just need a few parts (likely at home), waiting for the 3D printer seems a lot easier?