..but to get the same power (heat) output you need more current in a low voltage DC system. And power loss in the supply cables scales with the square of current, so you'll need thick (expensive) wiring in the wall or you'll risk the walls becoming an equally effective heating element.
Electric motors that run on DC are either brushed or have extra driver/conversion circuitry to pulse their coils in the right order. Both of these are not perfectly efficient.
My fridge is "inverter drive" and just runs continuously at a low duty cycle all day. Most heat pumps are like this too to dial up and down instead of strictly being on or off.
(Unsure what voltage the motors are running at though, so maybe AC-in is preferred to step it down before rectifying and chopping)
I guess all we'd really need is reliable switches and breakers that could be made affordably, and connectors that didn't create a huge arc every time someone unplugged a running space heater?
Still a pretty big challenge, the lack of arcing seems like a really big advantage.
It's quite likely that the motors on electric cars (and other efficient electric motors) are actually using an inverter to turn the DC into multi-phase AC and power an AC motor; this allows varying both the voltage and frequency of the AC fed into the motor.
(Also dumb that electric codes require dedicated circuits for many of these things, despite them not having the surge like they used to)
Heating elements can run on DC more or less unmodified. Also electric motors can run on DC efficiently (see electric cars). Back in the days 3-phase power was needed to run strong electric motors (very common in Europe, but i think it exists also in the US for factories and businesses). But there are many easy solutions nowadays to just run them on DC.