I'm waiting for something like that but with built-in buck-boost to make it immune for charger quirks

For higher voltages, use a barrel plug. There's a de-facto standard of 12V and 20V there, with the latter using a slightly larger plug. As they're used widely in laptops, parts are readily available.

> For higher voltages, use a barrel plug. There's a de-facto standard of 12V and 20V there, with the latter using a slightly larger plug. As they're used widely in laptops, parts are readily available.

If you look at Digikey AC-DC power supplies, you can find about 12K that end in a barrel jack.

Of those 12K, only 6 are not a 2.5mmx5.5mm, 2.1mmx5.5mm or smaller barrel jack. And Digikey seems to not even stock the mating jack for those 6 power supplies.

There is also absolutely no standardization of what voltage level corresponds to which jack. I have about a half-dozen dead Beaglebone Black's over the years because I had two different power supplies on my lab bench for testing and the plugs were "juuuuust" close enough (2.5mm and 2.1mm are compatible enough to let you short things out even if you can't completely seat them) to let me put 12V or higher onto a 5V-only jack.

Look for laptop replacement parts.

I have learned to ignore the connectors on power supplies I buy and just expect to replace them with the ones I've standardized on in my lab.