News for hackers. Stuff that matters.
Re:How to Build Your First Hardware Hacking Lab by syntaxing on Sunday October 22, 2023 @02:53PM (#37978016)
I’ve fried my 3D printer board once because of using a cheap meter. My good meter was out of reach so I grabbed a closer dirt cheap one to measure the output of the 24V bed. Instantly shorted my board and welded the leads to the screw. Long story short, don’t cheap out on multimeters.
Re:How to Build Your First Hardware Hacking Lab by fest on Sunday October 22, 2023 @03:28PM (#37978317)
What exactly happened there, and why do you think it wouldn't happen with a more expensive meter?
Re:How to Build Your First Hardware Hacking Lab by snovv_crash on Monday October 23, 2023 @02:29AM (#37982230)
My fluke has a fuse on the ammeter.
Re:How to Build Your First Hardware Hacking Lab by fest on Monday October 23, 2023 @06:12AM (#37983649)
Yes, unfused 10A range would have been my guess, but if device under test doesn't have short-circuit protection, it might as well die during the few tens of milliseconds that the fuse needs to heat up and blow, as well as a user error to be measuring voltage with switch in current measurement position.
Re:How to Build Your First Hardware Hacking Lab by MountainMan1312 on Sunday October 22, 2023 @03:32PM (#37978345)
I'm a beginner here, but I want to assume that if it was enough to weld it, the cheap meter wasn't the problem.
Re:How to Build Your First Hardware Hacking Lab by c_o_n_v_e_x on Sunday October 22, 2023 @06:40PM (#37979723)
Sounds like you tried measuring voltage while your meter was set to measure amperage