Re:Raspberry Pi 5
by flyinghamster on Thursday September 28, 2023 @06:21PM
(#37696663)
But, you really only need the 27W supply if you need to pump a lot of power through the USB ports. It'll run just fine (even using less power) on the 15W unit with more modest loads.
The standard charger is 2.5W, not 5W, and RPi3 will happily run from that, for RPi4 2.5W is somewhat marginal, but it will still work. I suspect that RPi5 is going to be somewhere around 3W (non-PD USB3).
The official RPi specs intentionally overblow the power consumption in order to provide an buffer for powering whatever ridiculous stuff people may hang off the USB ports.
Then the other issue is that all RPis need somewhat tighter voltage tolerance than what is in USB specification. So it is perfectly possible that a cable between the power supply and RPi is compliant, but has too large series resistance on power lines for RPi. And well, powering RPi from random aliexpress-grade “Android chargers” is completely another bad idea.
Re:Raspberry Pi 5
by BHSPitMonkey on Friday September 29, 2023 @09:25PM
(#37712028)
The old standard Pi PSUs output up to 2.5 amps (not watts), which at 5V gives you up to 12.5W.
Older boards with simpler workloads could usually manage at 1A (5W) but it was always preferred to have at least 2A (10W) to work with.
To whoever thinks pi's are cheap, you can get more functionality out of a used laptop for less money, but probably worse specs and probably x86.