I'm having trouble picturing what's going on here. I'm not sure what the apparatus is. The best I can figure, it's two containers of water with the reference gold in one and the crown in the other. However, this wouldn't be any different than just weighing the two pieces of gold (which are already known to be the same mass). I tried searching for "hydrostatic balance," but nothing relevant to this came up. Since you seem to understand this, would you mind explaining (or pointing to an explanation of) Archimedes's probable solution?
This can be quite a useful phenomenon practically. Anyone who has learned to scuba dive will know that if you take a deep breath in from your air tank you increase your volume without changing your weight and will be able to slightly change your bouyancy and float upwards or downwards without moving your limbs. Submarines also use the same phenomenon.
For clarity, the submarines fix their voice but adjust their weight by pumping or flooding their ballast tanks
Technically, it doesn't balance an air either, but it's just harder to notice the effect.
For an exaggerated example, imagine a 1-kg cube of styrofoam and another 1-kg cube of steel, each placed on opposite trays of a balance-scale.
The scale will be truly balanced in vacuum, and in air will appear balanced to the unaided human eye.
However when you submerge the entire system underwater, the differences will be shockingly visible... especially when the styrofoam floats up and off the scale entirely! It isn't because of negative mass or negative weight, just buoyancy that can no longer be ignored.
By conducting the "weighing" experiment again in a denser fluid (water) any subtle differences in density/ displacement become easier to measure.
The trick being described has the weigher balance the scale in air, with unknown mass A and some mass of gold B. The two sides are equal in weight in air, different from mass. Then the entire balance system is submerged. The difference in density of A and B, and therefor volume, leads the balance to become unbalanced.
It would be wise to add mass to the lighter side to try and measure how imbalanced. I would bet most adulterants are about half the density of gold or less. In g/cm3: Gold is 19.3, silver 10.5, lead 11.3, copper 9.0, nickel 8.9.
I think you're confusing the tool-calibration step with the actual measuring. As long as a scale is built symmetrically, an empty scale will read as balanced in any environment. Both sides are made from the same materials with the same densities and displacements etc.
Once you apply the dissimilar samples (a known 1kg of styrofoam and a known 1kg of steel) it will cease to read as perfectly even, because the air-buoyancy of the samples will be different. Perhaps not enough to see, but it's there.
Then you submerge the system, and the difference becomes obvious.
Ah, you seem to be assuming that the mass of the crown is known and an equivalent mass of gold can be produced.
> What we're actually trying to check is that the readout doesn't change ...
I'm not sure what you mean by readout. If one side is A and the other B the balance only has three readings, A>B or A=B or A<B.
Typically I would expect the crown to be put on one side of a balance. Then the weigher would search for the amount of gold that makes the balance, well, balance (A=B). In effect the weigher chooses diff_air==0.
> A good counterfeiter will ensure diff_air==0
I don't see how the counterfeiter has any influence on diff_air, since the mass is not known beforehand.
Your equations seem correct.
The first is effectively true because you can weigh the crown in air, which for goldish-density crownlike objects is so relatively thin that you'll get similar results to doing the comparisons in vacuum.
The second assumption of a reference-sample was explicitly stated earlier in the thread, inside the Wikipedia quote.
> I don't see how the counterfeiter has any influence on diff_air, since the mass is not known beforehand.
The crooked crown-maker already knows (A) how much true-gold mass their customer is expecting them to deliver and (B) they have many opportunities to mass-measure and adjust the profitably-adulterated not-quite-pure-gold object they are creating.
The idea is to balance a scale with the crown on one side and an equal mass of gold on the other side (no water yet), and then submerge the entire scale in water. Now there will still be the same mass on each side, but there will additionally be a buoyancy force on each side proportional to its volume. So if the volume of the crown is different from the volume of the reference gold, the buoyancy forces will be different and the scale will tip.
> The story of the golden crown does not appear anywhere in Archimedes' known works. The practicality of the method described has been called into question due to the extreme accuracy that would be required to measure water displacement. Archimedes may have instead sought a solution that applied the hydrostatics principle known as Archimedes' principle, found in his treatise On Floating Bodies: a body immersed in a fluid experiences a buoyant force equal to the weight of the fluid it displaces.[34] Using this principle, it would have been possible to compare the density of the crown to that of pure gold by balancing it on a scale with a pure gold reference sample of the same weight, then immersing the apparatus in water. The difference in density between the two samples would cause the scale to tip accordingly.[12] Galileo Galilei, who invented a hydrostatic balance in 1586 inspired by Archimedes' work, considered it "probable that this method is the same that Archimedes followed, since, besides being very accurate, it is based on demonstrations found by Archimedes himself."