News for hackers. Stuff that matters.
Re:Successful room temperature ambient-pressure magnetic lev... by fnordpiglet on Friday August 04, 2023 @02:22AM (#36996115)
I sort of don’t get this either. If your testing equipment is introducing resistance can you not “tare” or calibrate your measurements by measuring the equipments current flow in a direct circuit between probes to determine its base resistance then introduce your sample and measure the difference? The resistance in a serial circuit is additive, no?
Re:Successful room temperature ambient-pressure magnetic lev... by proto_lambda on Friday August 04, 2023 @03:02AM (#36996423)
The parasitic resistance will be orders of magnitude larger than your sample resistance, any detector capable of detecting the sample resistance would be completely swamped out by it.
Re:Successful room temperature ambient-pressure magnetic lev... by jacquesm on Friday August 04, 2023 @11:29AM (#37001370)
They are measuring voltage, not resistance (the resistance is computed). It's impossible to measure resistance without current and some voltage across the resistance, and while the parasitic effects are small the resistance we're talking about (and hence the voltage across that resistance) is so small that second order effects introduced by the probe wires can have a real effect, for instance if the probe wires have a higher resistance that makes them more susceptible to electric fields, which in turn would show up as a voltage. So this is anything but trivial.
Re:Successful room temperature ambient-pressure magnetic lev... by jacquesm on Friday August 04, 2023 @05:41AM (#36997636)
If you pick your reference current properly this effect should be extremely small. It will have a little bit of effect but nothing that you should normally have to worry about.