Re:Solar panel made with ion cannon is cheap enough to chall...
by jmaygarden on Tuesday March 13, 2012 @01:21PM
(#3699370)
They must have meant 20 micrometer thick layers since they also state that they are "a tenth of the thickness" of standard "200-micrometer-thick (0.2mm)" wafers.
Re:Solar panel made with ion cannon is cheap enough to chall...
by grep2 on Tuesday March 13, 2012 @01:20PM
(#3699365)
Exactly, the point is that the 20micron-layer of silicon that was shearing off is now the solar cell. Compare that to 200micron sheets, as used currently, and you see where the savings come from (i.e. you can get up to 10x more solar cells from a standard waver).
I hope this helps.
Re:Solar panel made with ion cannon is cheap enough to chall...
by abstractbill on Tuesday March 13, 2012 @01:47PM
(#3699512)
The hydrogen layer accumulates below the current surface of the silicon. When you put it in a furnace, it causes a very thin layer of silicon to shear off from the 3mm wafer.
Re:Solar panel made with ion cannon is cheap enough to chall...
by invalidOrTaken on Tuesday March 13, 2012 @07:32PM
(#3700869)
Err, 2.998, not 2.98.
EDIT: Oh, I neglected to pay attention to units. The above should be 3mm, 20-micrometer, and 2.98mm, respectively, which means the sheet shearing off is 0.002mm thick. This is seriously cool. Thanks for everyone's patience.