Re:The First Room-Temperature Ambient-Pressure Superconductor
by segfaultbuserr on Wednesday July 26, 2023 @07:14AM
(#36875766)
> basically any modern circuit board today [...] (0603's, TTSOPS, etc) [...] But almost anything done by hand can also be done with conventional solder.
I disagree. I don't consider 0603 passives and TSSOP packages "modern" anymore. Of course these components can be hand soldered with ease (possibly at top quality with the aid of a microscope). Unfortunately, even simpler ICs like DC-DC controllers are gradually abandoning TSSOP and QFP in favor of DFN, QFN, and LFCSP in recent years. These packages are all leadless, and frequently with thermal pads at the bottom. An older term for leadless packages is BTC - Bottom Termination Components [1]
After multiple failed QFN soldering attempts, I switched to ordering stencil, solder paste, and a hot plate. It worked perfectly on my first attempt, so I never looked back.
Unless you have top 10% soldering skills, which I don't (experienced smartphone repair technicians seems to have mastered the art of QFN), I found solder paste is required for maintaining your sanity for leadless packages. Furthermore, without reflow soldering, prototype assembly can be very time-consuming and takes hours, especially when you need 3 or more prototypes.
Occasionally, leadless packages also have optional difficulties turned on, completely eliminating the possibility of hand soldering, such as multiple pads for different nets (to minimize parasitic inductance), or having two layers of contacts, one row on the exterior and on row on the interior.
> You can easily do small scale work with almost all SMT components without solder paste. [...] The one exception is BGA devices
And DFN, and QFN, and LFCSP, and...
Thanks to industrial and automotive users, some ICs still have QFP versions that are friendly for hand operation due to their vibration resistance, but you sometimes have to pay a premium.
Finally, even plain-old QFP chips have bottom thermal pad these days (in that case, you can manually apply a blob of solder on the PCB and reflow again with a hot air gun, but manually apply a drop of paste is easier to work with).
[1] But these days it would make people think it's some kind of a Bitcoin mining ASIC. BTW, the last time I've checked, these ASICs are indeed QFN, so one can say they're BTC BTC chips...
I disagree. I don't consider 0603 passives and TSSOP packages "modern" anymore. Of course these components can be hand soldered with ease (possibly at top quality with the aid of a microscope). Unfortunately, even simpler ICs like DC-DC controllers are gradually abandoning TSSOP and QFP in favor of DFN, QFN, and LFCSP in recent years. These packages are all leadless, and frequently with thermal pads at the bottom. An older term for leadless packages is BTC - Bottom Termination Components [1]
After multiple failed QFN soldering attempts, I switched to ordering stencil, solder paste, and a hot plate. It worked perfectly on my first attempt, so I never looked back.
Unless you have top 10% soldering skills, which I don't (experienced smartphone repair technicians seems to have mastered the art of QFN), I found solder paste is required for maintaining your sanity for leadless packages. Furthermore, without reflow soldering, prototype assembly can be very time-consuming and takes hours, especially when you need 3 or more prototypes.
Occasionally, leadless packages also have optional difficulties turned on, completely eliminating the possibility of hand soldering, such as multiple pads for different nets (to minimize parasitic inductance), or having two layers of contacts, one row on the exterior and on row on the interior.
> You can easily do small scale work with almost all SMT components without solder paste. [...] The one exception is BGA devices
And DFN, and QFN, and LFCSP, and...
Thanks to industrial and automotive users, some ICs still have QFP versions that are friendly for hand operation due to their vibration resistance, but you sometimes have to pay a premium.
Finally, even plain-old QFP chips have bottom thermal pad these days (in that case, you can manually apply a blob of solder on the PCB and reflow again with a hot air gun, but manually apply a drop of paste is easier to work with).
[1] But these days it would make people think it's some kind of a Bitcoin mining ASIC. BTW, the last time I've checked, these ASICs are indeed QFN, so one can say they're BTC BTC chips...