News for hackers. Stuff that matters.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by pierat on Wednesday July 19, 2023 @01:18PM (#36789905)
Lets be fair.

This is where I buy arduino stuff. https://www.aliexpress.com/item/1005004305055818.html

And yes, the price is $.57 and $1.29 shipping. Its a total of $12.98 for 10 of 'em. And that includes USB cables and headers. And, they're also individually sealed.

And on https://store-usa.arduino.cc/products/arduino-nano?selectedS... , they're only $24.90 EACH. That's $249 not including shipping for the same.

Or perhaps you need an Arduino Mega for 3d printing? Only $12.88 here. https://www.aliexpress.com/item/32909503032.html

You want ESP32 with usb-c ? $34.35/quantity 10 . https://www.aliexpress.com/item/1005005565990528.html

Or perhaps STM32 is more up your alley with arm? https://www.aliexpress.com/item/32792513237.html and that includes the ST-Link hardware programmer and the board for $3.53

And, as long as you ask the dealer for the manual on Ali, they'll almost always provide that. Might be partially or all in Chinese. But again, us DIY makers can afford this. We can't afford the jokes of prices in the US or European markets.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by iancmceachern on Wednesday July 19, 2023 @02:20PM (#36790882)
To be fair lots of other people just buy arduino brand boards directly or through Amazon, sparkfun, adafruit, etc.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by joemi on Wednesday July 19, 2023 @02:49PM (#36791356)
I've had a really bad time over the years with the USB chips in the clones, to the point where if I'm using a clone these days, I won't even attempt to use its USB and I'll just use ICSP to program the arduino clone. For cases where I know I'm going to want to use the USB I'll happily buy a genuine Arduino.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by sokoloff on Wednesday July 19, 2023 @05:19PM (#36793566)
Really? I’ve had no problems with the (usually CH34x) USB interfaces across high double digits of boards. I could ICSP them (and do for some of the 3D printers), but I can’t recall a single instance of Chinese-made clones needing that.

There’s no way it would get me to pay 5-8x over the clones/respins.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by mianos on Wednesday July 19, 2023 @06:45PM (#36794550)
I have as well with MacOS. Never with a PC. I have some TTGO-display boards that have some USB to serial chip I could never get working on a Mac, no matter what drivers, uninstalling, installing etc. They worked fine on a PC. In the end I threw them out so they did not get mixed up. A very frustrating experience.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by tacon on Wednesday July 19, 2023 @03:13PM (#36791688)
>This is where I buy arduino stuff. >https://www.aliexpress.com/item/1005004305055818.html

>And yes, the price is $.57 and $1.29 shipping. Its a total of $12.98 for 10 of 'em. And that includes USB cables and headers. And, they're also individually sealed.

Yes, I've bought Arduino's from AliExpress. But that link is for a $0.57 "micro usb 30cm", i.e. a cable. The actual boards start at $6.36. Isn't shopping on AliExpress fun?

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by ilyt on Wednesday July 19, 2023 @03:23PM (#36791810)
you can get them at $3-4 bucks
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by ilyt on Wednesday July 19, 2023 @03:19PM (#36791771)
...so how VC funding help solve that problem ?
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by chaxor on Wednesday July 19, 2023 @04:25PM (#36792697)
They can increase the price further due to pressure. Problem solved.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by JohnFen on Wednesday July 19, 2023 @03:22PM (#36791807)
I stopped buying those cheap boards, because of quality/counterfeit issues. It's worth paying more (to me) to avoid those problems.

Even when they work, there are often longevity issues, which make them unsuitable for projects that I am giving to others or that I expect to be using for years to come.

But if I'm doing some experimental project where I want a lot of boards, or where there's a high risk that I'll fry them, the cheapies make sense.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by Dah00n on Wednesday July 19, 2023 @03:41PM (#36792058)
* * *
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by JohnFen on Wednesday July 19, 2023 @03:57PM (#36792289)
Counterfeit chips, not boards.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by alranel on Friday July 21, 2023 @07:31AM (#36812573)
This is well explained here: https://support.arduino.cc/hc/en-us/articles/360020652100-Ho...

A counterfeit is a product that tries to deceive customers making them believe that it's manufactured by someone else (regardless of the open source nature of its design). Open source hardware design only makes for a part of a commercial product and does not cover manufacturing, supply chain, quality of components, warranty, customer support etc. etc. for which it's important to distinguish who is the actual entity responsible for that product.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by HeyLaughingBoy on Wednesday July 19, 2023 @03:44PM (#36792098)
I may be an anecdote of 1, but I have purchased dozens (probably over 100 by now) of arduino clones of various types and have position converters based on Nano clones running large machine tools in various industrial locations. In all that time I've had one failure and that was due to me doing something stupid.

I think I've only ever had one genuine Arduino brand device and that was sent to me by a client.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by JohnFen on Wednesday July 19, 2023 @03:57PM (#36792284)
Excellent!

My experience is a bit different, obviously, but I'm happy that yours is better.

I'm not talking about clones in general, though, I'm talking about cut-rate boards from China and such.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by pclmulqdq on Wednesday July 19, 2023 @11:07PM (#36796471)
I have had a better experience with the Chinese boards, personally. If you go for the $3-4 ones instead of the $0.50 ones, you will usually get something actually with genuine parts and better quality than a brand-name arduino.

My favorite clone has ESD protection on the pins, and I have never seen it get fried, which I have seen with a few genuine arduinos.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by petre on Thursday July 20, 2023 @12:20AM (#36796860)
There are clones and clones and some other Chinese-designed boards like Wemos that work just fine. Maybe they're not $2 but you can get them for $5 a piece. I have an D1 mini biard with ESP8266 that has been running for at least 2 years with Tasmota and a bunch of sensors.

If the Western companies stop doing open source hardware, some other companies in China will go on with their own designs. They've already copied your designs and will also make their own and some of their companies will copy those as well and also conterfeit their own stuff.

The problem with these Chinese products is no documentation or useless documentation.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by MSFT_Edging on Wednesday July 19, 2023 @05:22PM (#36793618)
I'm talking institutions buying class sets, colleges having your intro to microcontroller classes have you buy an arduino at the book store. Starter kits on amazon, etc.

Of course you could buy something from aliexpress for pennies on the dollar and a month of shipping time, but a lot of people don't.

Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by flangola7 on Wednesday July 19, 2023 @06:49PM (#36794596)
And now will VC solve this problem? You can't stop china counterfeiting by throwing money at it.
Re:When Open Becomes Opaque: The Changing Face of Open-Sourc... by alranel on Friday July 21, 2023 @05:23AM (#36811762)
Without implying that your purchase choices are wrong by any mean, it's worth reminding that the price difference incorporates several hidden costs:

  - general higher costs to manufacture in Europe (including labor rights)
  - certifications about hazardous substances, radio compliance etc.
  - R&D (clones just download the CAD file and load it into the machines with zero costs for product design, development, testing etc.)
  - software development of the cores/board support packages (clones benefit from the upstream development with zero cost on their side)
  - software development of the tooling (IDE, CLI...) which is a recurring cost as things need to be maintained (clones benefit from the work done by Arduino with zero cost on their side)
  - marketing/adv/evangelism/documentation (clones have almost zero cost as they benefit from the long tail of the promotion made by Arduino)
That said, this is legit and Arduino even encourages it by deliberately making the products open source hardware thus releasing the files that any cloner can use and become a competitor at a fraction of the original costs. Buyers can freely choose if they want to support those costs or not, it's up to their ethics, budget and personal choice. But the prices are different because there are different thing inside.