News for hackers. Stuff that matters.
Re:Ask HN: Any Hardware Startups Here? by SkyPuncher on Thursday July 06, 2023 @12:22AM (#36611248)
> "fire-aft distance"

Sorry, darn auto-correct on my phone.

"Fore-aft" distance is what I meant. Essentially, the distance from the back of the child's seat to the driver's seat. In nearly all vehicles we own (including mid-sized SUVs), it's a close fit to install a baby carrier. In some cases, the front seats will be pressing against the carrier (unavoidable in some cases). With a full base, it's very obvious when the carrier is being pushed up too far by the contact and we need to adjust.

Re:Ask HN: Any Hardware Startups Here? by aquaphile on Thursday July 06, 2023 @12:39AM (#36611352)
Ah, ok, and thanks for clarifying. The Kioma base is low profile (vertical height), and only 1/2 inch out from the passenger seat upright face (your "fore-aft" distance). It does not extend out past the seating face of the passenger seat, or otherwise hang off the passenger seat. Low and slim generally results in a shorter moment arm from the anchorage point (where the latch/isofix mount points are), so reduces the collision forces for the seat/baby.

The Kioma seat is about a standard length, and the width is narrower than competing seats while fitting the same size baby.

Fun fact: the International Standards Organization (ISO) helpfully defined several envelope sizes (r1, r2, etc) to help with baby car seat standardization, and the EU crash regs (see UN r129) even have a test bar that represents the back of a driver's seat.