News for hackers. Stuff that matters.
Re:European Union votes to bring back replaceable phone batt... by bmicraft on Friday June 16, 2023 @06:54PM (#36365082)
Galaxy S5 had both and at 8.1mm/0.31in was thinner than phones are now. I don't see why I should have to choose 9 years later
Re:European Union votes to bring back replaceable phone batt... by scarface_74 on Saturday June 17, 2023 @02:24AM (#36367824)
You’re at least the third person to say this without the disclaimer - only if the rubber flap was securely covering the ports when it was dropped in water.
Re:European Union votes to bring back replaceable phone batt... by Jochim on Saturday June 17, 2023 @09:28AM (#36369998)
You repeat this everywhere. The port requiring a flap has no bearing on the waterproofing of the battery which used an entirely separately gasket on the back cover.

You can clearly see here[0] that the gasket on the flap protects only the USB port from water ingress. The battery and sim are protected by the grey gasket on the rear cover.

The opening for the rear speakers in the back cover reinforces the fact that the flap is there to protect the interface of the USB port and its housing. The rear cover does not contact the USB port at all.

[0] https://www.paulstravelpictures.com/Samsung-Galaxy-S5-USB-Ch...

Re:European Union votes to bring back replaceable phone batt... by scarface_74 on Saturday June 17, 2023 @09:58AM (#36370195)
And you had to make really sure that the battery was completely secured when you replaced it. There was even a warning on the screen.

https://www.gottabemobile.com/samsung-galaxy-s5-water-test-d...

> If you remove the battery, the Galaxy S5 will remind you to make sure the back cover is back in place securely. reply

Re:European Union votes to bring back replaceable phone batt... by Jochim on Saturday June 17, 2023 @11:00AM (#36370763)
Making sure a rear cover has snapped into place is much less prone to failure than acquiring tools and applying heat to a glued on rear cover, de-soldering/disconnecting a battery and evenly re-applying and heating new glue.