P.S. Thanks everyone for the comments on my article.
The 2-way communication is already there, your wish has been fulfilled. Okay, not all DC equipment has it, but that's how USB works. You plug into a USB port you get up to 100 mA free, you can negotiate to increase the limit up to 500 mA. Apple's iPod/iPhone/iPad chargers put nonstandard voltages on the data pins to indicate to the device that they can supply some larger amount of current, like 1A or 2A or whatever. Different voltages on the data pins correspond to different current limits. (So for the chargers it's one-way communication, not two-way like USB, but the two-way communication isn't needed for chargers that only plug into one device.) This isn't the first time Apple messed with the USB power specs, if you had a G4 cube back in the day you'd notice that the speakers would only work if plugged directly into the Mac, which supplied 800 mA from its USB jacks.
Personally, I think it's pretty dumb that USB only supplies up to 500 mA -- that's just 2.5 W. Meanwhile, Firewire could supply up to 45 W, which is why Firewire hard drives don't need to plug into the wall.
This is why I am REALLY hoping the materials revolution everyone keeps talking about takes off and we get some decent high frequency, high permeability, low loss, high flux density ferrites out of it (not too much to ask huh?). You can do lots of cool stuff with magnetics, even beyond just power conversion but the materials to do it really well just dont exist.
Even without superconductors, at 100 MHz the skin depth is still around 2 thousandths of an inch. Litz helps too. High power RF transistors exist. All the things you mention are limiting factors, but I still say the lack of good magnetic materials is the dominant barrier to higher frequency converters.
The middle pin on a magsafe power supply is used to send data two ways. It uses the 1-wire protocol and passes along (among other things), the serial number of the charger, the amperage of the charger, the power type (so the computer won't try and charge using an airplane adapter). Negotiation happens between the charger and computer for power and the LED color.
Personally I'd really love if everyone moved to a common MicroUSB MagSafe form-factor. But apparently there are some patents in the way...
Largely because the EU pretty much threatened the cell phone manufacturers with heavy regulation unless they came up with some sort of standard. Since they "have" to do micro-USB for the EU, they might as well do it everywhere.
Here is a post showing someone trying to get a standards following USB charger:
https://plus.google.com/117091380454742934025/posts/5suTrJrp...
It's terribly useful.
What you do is read the voltage you want from the device, turn the knob to the voltage you want and plug it in!
It was made in 1977. It works like the day it was bought i.e perfectly. I don't imagine a cheapy switch mode supply making it to 35 years old.
With regards to the "sweet DC juice" - it'll be full of noise if it's a switch mode supply. They're horrible devices that cause all sorts of local RF interference, noise and transients on the mains. Sometimes more than chucking an inductive load like a hoover on the line.
The only positive things is that they are small and cheap. They are definitely not good.
Also a switch mode supply does have a transformer! Just a small one.
One of the big advantages of the move towards micro-USB charging cables for phones, for example, is that in my house we now have several adapters spread around the house, and both my wife and I can now charge our phones at any one of them, despite having different brands.
http://storeimages.apple.com/2106/as-images.apple.com/is/ima...
http://www.empetel.es/WebRoot/StoreLES/Shops/17205045/4CB1/B...
http://images.apple.com/support/usbadapter/exchangeprogram/i...
http://www.handtec.co.uk/shopimages/products/normal/Apple_Ma...
OTOH one could put additional protection downstream in the load itself, and the PS would just need a well-known fixed overvoltage. If the "5V" PS started outputting 15V (but still under the PS max), the device would just shut down. However, don't expect manufacturers to do this on their own - as the article says, $1 is "expensive".
Just so you are aware, the Palm V which came out in 1999 had just such a power supply. A bit bigger than 1 inch, but it's a switching power supply and doesn't get warm (i.e. it's efficient).
I wish all DC equipment came with such power supplies. Heck, while I'm at it: here's a great idea. Establish 2-way communication with the solid-state power supply, so that the equipment can tell the power supply what it wants, and the solid-state supply can then give it out. Then you won't need a separate power supply for every piece of equipment!