Re:Air Purifier vs. Positive Pressure Fresh Air System – An ...
by rocqua on Thursday June 08, 2023 @02:36PM
(#36246541)
> I like the aluminum plate idea, maybe two big heat sinks with long fins attached back to back with the air blowing through the fins would work better and be cheaper.
That's not quite what I meant. I effectively meant: just make one big, wide heatsink. Then have the intake run through the left side of the heatsink and outtake through the right side. No 'heat transfer between the heatsinks' needed.
Re:Air Purifier vs. Positive Pressure Fresh Air System – An ...
by rapjr9 on Saturday June 10, 2023 @04:43PM
(#36274891)
Hmmm, there would still need to be heat transfer inside the heat sink from one side to the other via the bottom plate. Maybe that would still be more efficient than the transfer via a larger contact area between two heat sinks back to back? Not sure...either would probably work. What I can build might depend on the geometry and size of the heat sinks that are easily available. One big heat sink would make construction a little easier.
https://en.wikipedia.org/wiki/Heat_pipe
So what is the working temperature range for CPU cooler heat pipes? Though they maybe be optimized for 100F temperature difference, CPU's also don't always run at full speed and maximum power. So perhaps CPU coolers would still be useful at lower temperature differentials (and lower absolute operating temperatures.)