News for hackers. Stuff that matters.
Re:Air Purifier vs. Positive Pressure Fresh Air System – An ... by c_o_n_v_e_x on Wednesday June 07, 2023 @11:04PM (#36236673)
Former HVAC and controls guy here. If you are going to the trouble of putting in a PPS, why not measure and control the fan speed based off of static pressure inside the space? You could measure your static pressure at a point furthest from the fan or you have multiple static sensors and select/control based off the lowest reading.

The pressure only needs to be just slightly above ambient to keep the dirty ambient air out of the home. Providing unnecessary extra flow/pressure is doubly bad - one because your are spending extra energy to over-pressurize the space, two because your exchanging more outside air and thus the delta T between inside and outside.

Another consideration is that if your flow/pressure is too high, you'll have trouble trying to open/close exterior doors.

Re:Air Purifier vs. Positive Pressure Fresh Air System – An ... by usbinsider on Thursday June 08, 2023 @01:08AM (#36237484)
What’s a good sensor to do that with over the long term?
Re:Air Purifier vs. Positive Pressure Fresh Air System – An ... by c_o_n_v_e_x on Thursday June 08, 2023 @01:27AM (#36237604)
You need a differential air pressure sensor. I couldn't tell you any brands that would fall in the DIY price range. Dwyer is a big name in the commercial space.
Re:Air Purifier vs. Positive Pressure Fresh Air System – An ... by rocqua on Thursday June 08, 2023 @03:29AM (#36238457)
Might it be possible to DIY a differential sensor by taking two callibrated air pressure sensors, and subtracting their difference in software?

Would solve needing holes in walls, etc.