News for hackers. Stuff that matters.
Re:Why LightSquared failed: It was science, not politics by jacquesgt on Monday February 20, 2012 @01:34AM (#3611535)
A first order filter will attenuate at a rate of 20 dB per decade away from its cutoff frequency. For example, at a frequency 1000 times higher than its cutoff frequency, a first order filter will attenuate by 60 dB.

An n-th order filter will attenuate at 20*n dB per decade.

Let's assume based on your numbers the GPS band is 20 MHz away from LightSquared's 1.5 GHz-ish band. That's log(1.52/1.5) = 0.00575 of a decade.

We need 180 - 70 = 110 dB of attenuation to push the LightSquared signal amplitude well below the GPS signal amplitude. Solving for n above, 1/0.000575 x 110/20 = 956.

An order 956 filter is not something you can design for a buck or two. It's certainly not something you would design if you expected to filter out other space-based -160 dBm signals. Plus, the numbers above are very aggressive. You're going to need to do even better if you don't want to distort the signal you care about.

There are no comments on this comment yet.