Re:Booting Modern Intel CPUs
by MichaelZuo on Monday April 17, 2023 @06:51PM
(#35607704)
How is the system controller initiated? I assume via a simpler process?
Re:Booting Modern Intel CPUs
by convolvatron on Monday April 17, 2023 @06:58PM
(#35607770)
using something like the 'brownout detector' power controller above. I'm pretty sure I've seen designs (and done this myself), that just puts a little RC on the reset pin. 100ms aughta be enough for anyone! microcontrollers (like those used for board controllers) have a much simpler power and clock structure than big cpus...and many of them are built to just come up on their own.
Re:Booting Modern Intel CPUs
by MichaelZuo on Monday April 17, 2023 @09:38PM
(#35608939)
> and many of them are built to just come up on their own.
I'm not quite sure of this, how do these controllers 'come up on their own' without any reliance on anything else?
Re:Booting Modern Intel CPUs
by convolvatron on Tuesday April 18, 2023 @09:45AM
(#35613930)
internal flash for boot, internal power control, internal clock
Re:Booting Modern Intel CPUs
by MichaelZuo on Wednesday April 19, 2023 @07:30PM
(#35634610)
It sounds a bit recursive, wouldn't the internal boot process need the same sort of procedure?
Re:Booting Modern Intel CPUs
by convolvatron on Tuesday April 18, 2023 @03:32PM
(#35618882)
I just was looking at https://www.pjrc.com/store/ic_mkl02_t4.html
maybe this will give you some context, its about a small controller booting a larger SOC ARM part
Re:Booting Modern Intel CPUs
by MichaelZuo on Tuesday April 25, 2023 @12:12PM
(#35702478)
Thanks for the link!
these days its more likely that there is a system controller orchestrating the bringup. potentially waiting for all the voltage converters and the clock generator to settle before raising the reset line. depending on the architecture it may not really be a simple pin, but addressed by the system board controller through the scan network.