Sure, I would not expect to do any advanced IO. But right, probably there is no serial console really close to the CPU either, this is not a Raspberry PI. No idea what signals could be used for that.
Page tables I am not sure either. Could you still do it like in Linux 1.0? No idea what things looked like then, but I assume much less dedicated hardware support.
Re:Booting Modern Intel CPUs
by JoshTriplett on Monday April 17, 2023 @03:30AM
(#35597736)
> probably there is no serial console really close to the CPU either
outb to 0x3f8 might work.
I know there were once versions of Linux that supported running without an MMU. Those versions, with very limited hardware support, might work in this mode.
Re:Booting Modern Intel CPUs
by mschuster91 on Monday April 17, 2023 @04:14AM
(#35598030)
It's still part of the kernel code: https://www.kernel.org/doc/Documentation/nommu-mmap.txt
And apparently, good enough to run DOOM: https://hackaday.com/2022/12/07/a-tiny-risc-v-emulator-runs-...
Substantial effort I don't doubt. First probably years of learning how things work under the hood for most normal mortals.
Hasn't Intel supported DMA into L3 cache for something like a decade now?
Right, I did not specify what L ;) And the original article did not mention either.
It is supported on true Xeon systems.
I believe that it is not supported in Core CPUs, not even in those of them which were branded as Xeon E or Xeon W.
DMA on x86 does update contents of CPU caches.
Re:Booting Modern Intel CPUs
by JoshTriplett on Monday April 17, 2023 @03:30AM
(#35597738)
Yes, it does, but that doesn't mean the hardware necessarily supports doing it without a memory controller.
It'd likely be a substantial effort to port Linux.