The purpose of this exercise is to illustrate why it is so difficult to effectively emulate these circuits and this does it quite well and in a way most anyone can understand. So to show how the output stage loads the filter's core and affects frequency response, distortion, and gain of both the filter and the output stage I add in filtering, distortion and variable gain between them and go through the work getting them to respond as they do in the filter. Then go on to show how the resonance and cutoff affect this which is rather circular and further complicates getting that added bit of circuitry to respond proper and how everything affects everything else, nothing is in isolation.
So I slowly make up a big massive mess of a patch in PureData that eats my entire CPU but does a fairly solid job of the emulation then try and simplify things down. Along the way we compare our progress with the various digital implementations of the filter and probably will compare with the real deal.
Yup, there are two main philosophies: start from a very accurate (e.g. SPICE) model and simplify it enough that it runs in real-time or start from a simple model (e.g. biquad) and add nonlinearities as required.
If you want talk more about the other approach, I just added an email in my profile. ;)
The mini VCF is not the best option for my needs but it is useful in that I have a good many implementations to use as controls as the patch advances and I can show why it all matters well enough, I can provide musical examples which most anyone will be able to hear the differences between. Ultimately I think the software folks are making the wrong sacrifices which is why pedals like the Sans-Amp series and even the somewhat naive Run Off Groove [0] DIY offerings maintain a solid following despite not sounding much like the amps they attempt to mimic, they do respond like the amps, they maintain the dynamics or at least something close enough.
I am not sure we will have much to talk about but I will give you an email when I am back on the computer.
I'd be very interested to see your approach. So far, the most promising (non-NN) technique I've seen requires taking a symbolic inverse of a sparse matrix, which is just barely possible for a simplified pedal model.