Lot of projects/how-tos here: http://diyaudioprojects.com/Tubes/tubes.htm
Another DIY forum: https://www.diyaudio.com/community/forums/tubes-valves.5/
A "Darling" I built from scratch (I built over half a dozen in total): https://imgur.com/PBKOQMk
(Of all the tube amps I've built the Darling is still my favorite for the sound, simplicity. The tubes were cheap enough to find — used in the radios in WWII bombers, made obsolete by solid-state and military inventory was dumped on the market. Maybe 1-Watt in power though? You might be surprised how listenable that is through full-range drivers + powered sub.)
A Darling write-up that got me started https://www.nmr.mgh.harvard.edu/~reese/Projects/DoubleDarlin...
Hammond Manufacturing makes a lot of applicable transformers for the mid-to-lower range of hifi and they're largely stock items.
See if you have local hamfests. Tons of tube stuff there.
Remember, it doesn't need to be an audio tube to pass audio! My most-used amplifier is built around a pair of 6T9 TV Compactron tubes (basically the IC of the tube world, multiple elements in a space saving package). The circuit came out of an old GE vacuum tube manual. As long as you don't tell the electrons (or audiophiles), they'll never know!
But considering they sell magic power cords ( https://bottlehead.com/product/bottlehead-power-cord-kit/ ) it's probably well into audiophoolery spectrum.
Assuming the basic Crack 1.1 is similar, at a price of $349, that's $165 / 90% markup for figuring out the kit for you, a nice case, and very detailed assembly instructions with lots of pictures and warnings about the dangerous parts and whatnot.
(And $96 of that $184 is for the Hammond 273AZ transformer, which I found a post saying is Bottlehead's custom PT-3, but I'm not too sure about that, and I wasn't going to spend too much time figuring out the specs for the PT-3. Perhaps a better choice of transformer would significantly cut down that cost.)
You clearly know what you’re talking about, so I appreciate your input. Now that I’m more confident, my goal is to learn things at your level and understand how to assemble things more practically and at cheaper costs.
My favorite was the "stepped attenuators" they used to sell, Rat Shack rotary switches and ten cent resistors.