From the abstract:
> "Our experimental results show a coefficient of performance of 30% relative to Carnot and a temperature lift as high as 25°C using a voltage strength of ~0.22 volts."
And from the actual paper:
> "To modulate the electrochemical potential in a real system, the ion concentration can be controlled by applying a voltage in an electrolytic cell (e.g., dual-ion battery), where the applied voltage is typically ~1 V. This stimulus is considerably milder than those used in magnetic, electric, and pressure-based caloric systems."
I'm not following the paper at all, but it sounds like requiring a low electrical potential is a good thing.
I'm not 100% on this given I don't want to buy the paper and am not an expert in this field, but have done a lot electrolysis related work on personal projects.
edit: Also electroplating would probably become a concern as well depending on what exactly is in that brew.
I don’t understand the difference between electromotive force and energy associated with electricity. How can there be low electromotive force with high energy?
One interesting cooling technology is the free piston stirling cooler. Coleman used to sell one years ago for ~$400, and then discontinued them. They are highly prized now. Basically they took very little energy to start cooling something and could cool to very low temperatures. The coleman model seemed to use CO2 as the cooling medium. They still sell similar coolers now, but for >$2k usually with helium as the medium. They are so pricey now they are mostly used for medical transport. There might be some "you need a license" stuff with these types of coolers since they can go quite far below zero
I've also noticed you can buy the FPSC piston part itself (without the box) for random prices. search "free piston stirling cooler" on amazon.
It's too bad they didn't take off, I think they would pair very will with solar for solar-powered refrigeration.
This is exactly why it's BS: a compressor requires high(er) voltage to start and run, and Peltier coolers can run on 5V USB outlets. However, compressor-based cooling is FAR more efficient than Peltiers, which are infamously inefficient. Voltage really doesn't tell you anything. The problem is that journalists have no idea what a Volt is.
Electrocaloric cooling requires an E field of hundreds or thousands of volts per cm to cool a material 15K or so, so it's remarkable that ionocaloric cooling can be driven by a weak field. They never imply that it is more power efficient than every other cooling technique -- that idea was injected upthread.
It does take energy to create and sustain such a strong field. But in any case, fields that strong break polymers and other materials (air) and are harder to work with generally. EC/MC cooling devices are expensive and inefficient as a result.
> journalists have no idea what a Volt is
Institutional science communication doesn't work like that. Bylines aside, these articles are an agglomeration of what the researchers, communication team, grant managers, lab directors, and DOE bureaucrats want to say.
I agree though, just tell us how much more efficient it is than existing technology.
>> Low voltage with extremely high current is still a lot of energy
To be a bit pedantic, this is strictly a lot of power - it is necessary to multiply by time to get energy.
1 amp * 1 volt = 1 watt = 1 joule / second
I mean sure, voltage was not the right term to use, but it doesn't necessarily mean they cheated.
It's fairly common for articles like the one linked to be written by the lab's communications department, who may or may not be familiar with the subject at hand.
This makes no sense. Voltage is not a measure of energy, it's a measure of electrical potential, or electromotive force. Low voltage with extremely high current is still a lot of energy. The only thing important with refrigeration efficiency is how much (electrical) energy it requires to achieve a certain change in thermal energy; for this, you'd need to measure the voltage and current, or just the wattage, plus measure the actual thermal energy change (usually measured in BTU for air conditioners).