News for hackers. Stuff that matters.
Re:US companies are producing heat pumps that work below -20... by throw0101c on Wednesday December 28, 2022 @11:57AM (#34162968)
> A standby generator isn't financially practical for most folks ($6k + install).

An Honda EU2200i generator costs US$ 1400 (and less expensive generators can probably be found):

* https://powerequipment.honda.com/generators/models/eu2200i

You also need an external plug, a cable going from that plug to a sub-panel, and a line going from the sub-panel to the main panel with an interlock device for safety, if you wish to avoid running extension cords.

There are dual-fuel generators that can also use either gas/petrol or propane, and some tri-fuel generators that could also be connect to a natgas pipes (and conversion kits that can be added to propane-capable generators).

Re:US companies are producing heat pumps that work below -20... by phil21 on Wednesday December 28, 2022 @12:38PM (#34163476)
The Honda EU2200i can be aftermarket modded to run tri-fuel. I did it to mine just in case, and currently have it set to run propane. A simple swap of a small part will let it burn natural gas instead.

I also like that I don't have gasoline to deal with - I can stock up a 20lb propane tanks and generally forget about it. Rotating gas is a giant pain if you keep enough on-hand for an outage of any appreciable amount of time.

Re:US companies are producing heat pumps that work below -20... by toomuchtodo on Wednesday December 28, 2022 @01:06PM (#34163797)
Would you mind sharing a link to the part you mentioned?
Re:US companies are producing heat pumps that work below -20... by sokoloff on Wednesday December 28, 2022 @01:48PM (#34164272)
Re:US companies are producing heat pumps that work below -20... by phil21 on Wednesday December 28, 2022 @04:20PM (#34166124)
https://www.hutchmountain.com/products/honda-eu2200i-propane...

If you are at all handy this is probably a 30 minute job, it involves cutting a single hole for the propane tank connection and otherwise can be done with a screwdriver.

It's been reliable for me going on 4 years now - although I only really have run the generator for maybe 100 total hours since then.

I haven't looked for some time, but there are also other kits on the market. I those these guys due to reputation on forums, and how clean it is to install.

Re:US companies are producing heat pumps that work below -20... by mindslight on Wednesday December 28, 2022 @12:30PM (#34163387)
The problem is that while all that electrical work is a weekend project for a DIYer, it's quite expensive to have a professional do it. So then you start bundling things (since I'm already paying thousands, maybe I'll just splurge for that Generac with an auto tranfer switch...)

(FWIW, I believe there is an aftermarket propane conversion kit for the EU2200i. Converting a gasoline engine to run on propane is straightforward)