zeroOneEdges = x & (x ^ (x >> 1)) // This must be a signed arithmetic shift.
rightmostZeroOneEdge = zeroOneEdges & -zeroOneEdges
toggleMask = rightmostZeroOneEdge | (rightmostZeroOneEdge << 1)
rightmostOne = x & -x
shiftMask = rightmostZeroOneEdge - 1;
onesToShift = x & shiftMask
shiftedOnes = onesToShift / rightmostOne // This must be an unsigned division.
x = ((x & ~shiftMask) ^ toggleMask) | shiftedOnes
Now it wraps around without a conditional expression but just as the one from the library will divide by zero if called with zero, so either do not do this or add a check for zero and return zero in that case. It works for all ones.My first attempt was on the right track but also missing a step. Not only must the rightmost 01 edge be turned into 10 but also all the ones to the right of the 01 edge must be shifted back to the right, i.e. <rest>01<ones><zeros> must become <rest>10<zeros><ones>. This shift is done with division and it is important that it is an unsigned division. It is also important that the 01 edge detection shift is a signed arithmetic shift.
The algorithm from the library and my solution are quite similar and they might actually be identical with the one from the library being more optimized and shorter. I would not be surprised if the one from the library actually also works in principle but the implementation got a tiny detail about the signedness of one of the operations wrong, because that will result in the described issues, i.e. not working properly once the sign bit gets involved, either for all ones or during the wrap around.
shiftedOnes = (x & (rightmostZeroOneEdge - 1)) >> ctz(x) // This must be a logical shift.
With all the fancy bit level instruction, this could probably be simplified in general, but I usually avoid them because I mostly see this as an exercise in making it work if you only have access to the basic arithmetic and logic operations and shifts.
But I can no longer edit it. 1110 should become 10011 but my »solution« yields 10110. Will have to rethink this.