Re:Solar panel waste may not be nearly as bad as we once tho...
by Schroedingersat on Thursday November 17, 2022 @01:37PM
(#33643476)
> There are different ways to calculate "primary energy". Adjusted for inefficiencies, nuclear is 4.3%. In other words, tripling that means we can shut down at least ~9% of PE worth of fossil fuels plants.
> Renewables get a similar boost from this approach, of course, at least long as we don't have to store it.
So if you ignore all the non low grade heat and inefficiencies entailed in turning electricity and low grade heat into chemical feed stock and the countries in energy poverty you can manipulate a number? Well done. Now after moving the goal posts 2/3rds of the way across the field, show some evidence that they can be met. How do you get to 3TW of nuclear production in the same timelines as the renewable energy targets where does the Uranium come from?
> More ad hominem. Do you want to start a flame war?
Demonstrating ignorance or willful misrepresentation consistently on every single point that can be checked is more than sufficient grounds for requiring positive evidence for the claims for which your strongest argument is: 'you can't prove categorically that it's impossible for a solution to very obvious issues to appear later'.
> Maybe you should re-read your sources. Pretty sure you will find that 2kW is around the average output of 50m^2 during the peak of the day. This illustrates a risk of measuring energy in watts. Most such calculations use 4-6 as estimates for number of "hours" worth at such an output, meaning the area needed goes up by a factor of 4-6. So let's say 250m^2.
So back to blatant lies. 2kW peak would be a sixth of that with state of the art mass production panels -- on the order of 8.5-10m^2 or as little as 7.5 for bifacial panels with <100% coverage. Some utility systems have 50% coverage ratio, others have 98%, the 50% ones are usually optimized for more than the fixed tilt solar resource.
Very few people live anywhere with less than 3.5kWh/day and the overwhelming majority of those who don't have existing nuclear and already developed hydro and wind resource. So around 40W/m^2 is accurate when sourcing mostly electricity and some low grade heat (this is very shocking, I know, but things get hot when left in the sun and you don't need to use an element and a PV panel to heat water or sand).
Even using exclusively winter sunlight from regions within AC transmission distance of >93% of the population would only double this.
> Now, on top of this, the energy tends to be needed either in a different location or at a different time. Batteres with a 70% efficiency increase this to 350m^2 while storing it as H2 at 25% full-cycle-efficiency increases it to 1000m^2.
30% battery losses are fairly old technogy or a system like PHES, direct thermal storage exists, you don't need all energy to go through seasonal storage as hydrogen and for every joule to be created in seattle during winter. You especially don't need hydrogen to be burnt or put into a fuel cell to create hydrogen for chemical feed stock or high grade heat. PEM electrolysers are much more efficient than alkaline and improving monthly. Hydrogen doesn't need to go through a rankine cycle steam engine to be used for electricity. Finally solar resource in a good area is closer to 80W/m^2 average than the 40 I used above.
If we needed every single joule to be from sunlight rather than as a salient example of how ridiculous the land use argument is then high energy intensity goods can just be created in sunny areas using PV and CSP (which is dispatchable) and shipped.
Care to try again but without the bit where every single number in your calculation is an intentional misrepresentation of current established technology (let alone emerging mass production technology)?
> Renewables get a similar boost from this approach, of course, at least long as we don't have to store it.
So if you ignore all the non low grade heat and inefficiencies entailed in turning electricity and low grade heat into chemical feed stock and the countries in energy poverty you can manipulate a number? Well done. Now after moving the goal posts 2/3rds of the way across the field, show some evidence that they can be met. How do you get to 3TW of nuclear production in the same timelines as the renewable energy targets where does the Uranium come from?
> More ad hominem. Do you want to start a flame war?
Demonstrating ignorance or willful misrepresentation consistently on every single point that can be checked is more than sufficient grounds for requiring positive evidence for the claims for which your strongest argument is: 'you can't prove categorically that it's impossible for a solution to very obvious issues to appear later'.
> Maybe you should re-read your sources. Pretty sure you will find that 2kW is around the average output of 50m^2 during the peak of the day. This illustrates a risk of measuring energy in watts. Most such calculations use 4-6 as estimates for number of "hours" worth at such an output, meaning the area needed goes up by a factor of 4-6. So let's say 250m^2.
So back to blatant lies. 2kW peak would be a sixth of that with state of the art mass production panels -- on the order of 8.5-10m^2 or as little as 7.5 for bifacial panels with <100% coverage. Some utility systems have 50% coverage ratio, others have 98%, the 50% ones are usually optimized for more than the fixed tilt solar resource.
Very few people live anywhere with less than 3.5kWh/day and the overwhelming majority of those who don't have existing nuclear and already developed hydro and wind resource. So around 40W/m^2 is accurate when sourcing mostly electricity and some low grade heat (this is very shocking, I know, but things get hot when left in the sun and you don't need to use an element and a PV panel to heat water or sand).
Even using exclusively winter sunlight from regions within AC transmission distance of >93% of the population would only double this.
> Now, on top of this, the energy tends to be needed either in a different location or at a different time. Batteres with a 70% efficiency increase this to 350m^2 while storing it as H2 at 25% full-cycle-efficiency increases it to 1000m^2.
30% battery losses are fairly old technogy or a system like PHES, direct thermal storage exists, you don't need all energy to go through seasonal storage as hydrogen and for every joule to be created in seattle during winter. You especially don't need hydrogen to be burnt or put into a fuel cell to create hydrogen for chemical feed stock or high grade heat. PEM electrolysers are much more efficient than alkaline and improving monthly. Hydrogen doesn't need to go through a rankine cycle steam engine to be used for electricity. Finally solar resource in a good area is closer to 80W/m^2 average than the 40 I used above.
If we needed every single joule to be from sunlight rather than as a salient example of how ridiculous the land use argument is then high energy intensity goods can just be created in sunny areas using PV and CSP (which is dispatchable) and shipped.
Care to try again but without the bit where every single number in your calculation is an intentional misrepresentation of current established technology (let alone emerging mass production technology)?