>Using only a single light source, scientists have set a world record by transmitting 1.8 petabits per second.
In 2021 the world record was 300 TB[0]. Why is the headline misleading? for reference, the headline is currently "Record-breaking chip can transmit entire internet's traffic per second." This seems to be correct:
>According to a study from global telecommunications market research and consulting firm TeleGeography, global internet bandwidth has risen by 28% over the course of 2022, with a four-year compound annual growth rate (CAGR) of 29%, and is now standing at 997Tbps (terabits per second).[1]
>Normally, data over a fiber is multiplexed using many wavelengths of light (wave-division multiplexing, or WDM for short). These wavelengths are generated from an array of lasers, forming a frequency comb.
I think that is a relativly new techniuque. For example see https://www.nature.com/articles/s41467-019-14010-7 :
>Optical frequency combs were originally conceived for establishing comparisons between atomic clocks1 and as a tool to synthesize optical frequencies2,3, but they are also becoming an attractive light source for coherent fiber-optical communications, where they can replace the hundreds of lasers used to carry digital data
So "normally" might give the wrong impression. As far as I know, no commercial service is using it. One reason is the cost, which this article addresses by proposing a chip based apporach which makes it cheaper and easier.
[0]https://www.nict.go.jp/en/press/2021/07/12-1.html
[1]https://www.computerweekly.com/news/252524883/New-networking...
Edit: I should point out that the "previous" record was with a 4-core optical fiber, whereas this one uses a 37 core one. They are really two different things: one about the cable and the other about the transmitter. So this one doesn't "beat" the other.
The "chip" is a CW laser, so it transmits no data.
It's a little hard to tell from the article + PR, but I think the result is a laser with a stabilized frequency-comb output suitable for WDM that has been implemented on a single die (which is still a nice result.)
Perhaps I missed that they implemented an entire transmitter chain on the "chip", but I believe the chip innovation is the continuous photon source, not the data transmission.
(Worked on this project.)
> And novelty indeed lies in the width of the comb source and the SNRs of the obtained channels.
Can you expand on this? I'd be curious how it compares to a traditional (multi-laser) WDM system, probably others would be too.
>Current fibre optic communication systems owe their high-capacity abilities to the wavelength-division multiplexing (WDM) technique, which combines data channels running on different wavelengths, and most often requires many individual lasers. Optical frequency combs, with equally spaced coherent comb lines derived from a single source, have recently emerged as a potential substitute for parallel lasers in WDM systems[0](2021)
So "These wavelengths are generated from an array of lasers, forming a frequency comb" is using "frequency comb" to mean something else in that sentence.
[0]https://www.degruyter.com/document/doi/10.1515/nanoph-2020-0...
Yes, "frequency grid" would have been better terminology. Common spacing for WDM is 50 GHz between adjacent frequencies (it's ITU spec'd iirc), and those rely on feedback system to maintain the spacing precision.
I believe the press release is here: https://www.dtu.dk/english/news/all-news/new-data-transmissi...
The innovation: Normally, data over a fiber is multiplexed using many wavelengths of light (wave-division multiplexing, or WDM for short). These wavelengths are generated from many lasers.
The result here creates a frequency comb from a single laser, and uses that for the transmission. It saves all the power associated with the many lasers traditionally used for WDM. All the "chips" that do the modulation, transmission, reception, and de-modulation are still there, but you've cut out all but one laser from the system. It's a nice result.
That was my quick take, please correct if you have more info.